Docsis chat

Hello,

in germany there is a new law which allows the customer to choice any modem.

I'm looking for a modem config file, which fits many(all) modems. The config file should be able to get any CPE of the customer online. There is no need to configure a E-MTA.

At the moment i would like to use this one:

Hello we are looking to liquidate three of the following BSR64000HD DOCSIS 3.0 configurations. These bundles are used, tested working with 90 day warranty. I am happy to break out individual line cards if needed!

Take a look at this 12x1 configuration that I’m trying to drop on my 10K with 20x20’s.

I can get a 8x1 channel downstream bonding config to work just fine, but the modems aren’t taking this 12x1. They try to boot up with 12x1, but they reject it and come online with 1x1 narrowband.

What am I missing?
_______________________

boot system flash disk0:ubr10k4-k9p6u2-mz.122-33.SCG4.bin
card 8/1 ubr10k-clc-mc2020v license 20X20

Hello all,

I recently switched a PICO mini 200a out with a ubr10k and used the same channels/widths etc.
It appears that modems are connecting with 8 DS and 4US just fine, however modems appears to have slower speeds than what they had with the Pico.
I've adjusted the speeds in the config file, which seemed to help the download speeds but the upload speeds are about 20% of what they've normally been.

Any suggestions or more info needed?

Thanks in advance.

Hello community.

Does anyone know anything about issue of setting this modem to router mode?

The problem is that when this modem is set to router mode, it doesn't allow end user,which is behind nat, access to internet.
Maybe some specific tlv code or snmp object?

Hello all

I am looking to know if anyone know if the Cisco CNR version 6.05 support Docsis 3.0?

or what guide I can fallow to know what is it needed to can make work D3 provisioing.?

thank you all

Searching for SIP firmware for NETGEAR CG 3100, can anyone help? Thanks

Dear All,

I need a help. I would like CMs and EMTAs in seperate subbundles:

Hi,

Im new to Arris CMTS gear and was doing some tests on cable modems.
I ran a DOCSIS ping and got the following result:

Providing 5 DOCSIS station maintenance opportunities, timeout is 1 sec:
!aa!!
Success rate is 100 percent (5/5)

does anyone know what the 'a' means ??
It obviously counts as a successful result but id like to know the difference between '!' and 'a'.

Thanks

Fred

HI Everyone,

I looking a way where i can push a upgrade on my plant to upgrade D3 cable modem. I actually running on Aris CM820 and DG860 cable modem. I'm running my dhcp server with CNR and i did a tftp script where i can upgrade one modem at the time and everything working well. the problem is i dont have 1 kinds of cable modem, but 2 differents models on my cable plant.

Is there any way, in the config file, to tell it if if it is this model, use this image, this model, this email, etc..

I'm using one config file for each different speed only.