Docsis chat

I have a ubr7246 with MC88V i have been working to replace our old Cisco CMTS with this unit.

I can get D2 modems to connect and dload at 30mbs and upload at 2mbs.

I have D3 modems using Motos 6141 8x4 and i get 50mbs down and 11 up.

I have the D3 modems config file set to 120 down and 30 up. I am looking for suggestions on my config to get me on track.

Hi, all! Can somebody help for me....?
We buy aka "second hand" casa c2200 many years ago...

Now we have trouble with installed modules...examle:

casa#show system
Product: C2200, Module: SMM
Major rev 1, Minor rev 1
serial_no = SV03B89S0013
CFE version 2.1.3
System Time: Thu Aug 11 11:22:22 UTC 2016
System Uptime: 0 d, 0 h, 58 m, 21 s
128MHz T1 Clock

Module 0 QAM NotReady

Module 1 UPS NotReady

Module 2 UPS NotReady

Module 3 UPS NotReady
.....

I'm working with 2x8 cards on a BSR64000

Would like some confirmation if anyone can offer it for the RX48 cards.

Is it possible to have multiple logical carriers on a single interface?
Is it possible to shut down a physical port to give its logical ports to another physical port thus adding room for more carriers?
Is upstream bonding doable with the RX48?

Is there any limitation for downstream channels?

Can anyone who runs a BSR64000 offer some examples of configuration for doing this?

Much appreciated.

Thanks!

So I've been reading a couple of nice things about IPDR, but sadly I can't find any software that is as out-of-the-box as a mibbrowser.

Greetings we just brought in one new open box Vecima Networks Terrace QAM Hospitality Gateway pn: TQSYS-M00020-2AC-01

Configured as follows:

Qty 2 AC PWR, 1 QAM Input Tuner Card Features (TQ1045+), 2 RF Output Card Features (TQ1020D+), 1 Auxiliary Input Module with EPG (TQ1055+), 1 Processor Card Features (TQ1007+)

Looking for $5895.00 obo

90 day warranty. Thanks!

Kurt Paulus
NW Remarketing Inc
503.391.8191 x114
503.881.3578 Direct
503.375.8470fax
AOLIM- kurtnwr
kurt@nwrusa.com

Can anyone recommend handy MIB Browser tool to manage MIBs? (for Linux)

Hey Guys,

We are trying to replace a failing C3 unit with a UBR 7426. The modems connecting to the UBR aren't even getting passed downstream. Can you look at my config and see what I'm doing wrong?

Thanks - Z

Hello im having trouble in reading Interface utilization we are using a Cadant C4c with 24 upstream and 12 downstream, in the picture I attached if you add the DataRate of downstream(15/0-11) you will get 334.06Mbps but if you can see we only have a DataRate of 240Mbps in our Gigabit port(17/0).

why do you think our downstream port and gigabit port is not in sync?

Hi All,

I am facing a strange issue with my Verizon BHR/DXN 220 device.

I have a CPE connected to the Verizon BHR/DXN 220 with MOCA interface.
With this if I send Upstream traffic (say 10 Mbps) alone I am getting very less traffic output (0.04 Mbps).
For generating traffic I am using Spirent Test Center.

But as soon as I start sending Downstream traffic my Upstream traffic is automatically getting recovered to 10 Mbps.
I am not able to figure out why this issue is getting seen with Upstream traffic alone.

Hello we have the following used QAMS in stock

1x Motorola APEX1000 48QAM- $4500.00ea

1x Motorola APEX1500 96QAM - $5500.00ea

Both single AC Power 90 day warranty.

Thanks

Kurt Paulus
NW Remarketing Inc
503.391.8191 x114
503.881.3578 Direct
503.375.8470fax
AOLIM- kurtnwr
kurt@nwrusa.com