Docsis chat

Hi

I need your help,

Our company requires some users to access the Internet through another provider

How can I classify those users in dhcp so that by something special that is configured I can know that those cpe take IP in a different range than the rest?

Please someone help me with this, how can I make this work?

wondering if anyone here might be able to help me out with understanding how to get a tg3482p2 to provision successfully for a sip registration.

I have a Jianghong d3 CMTS JH-he3416 and am in the process of trying to figure out how to make this device register with an asterisk sip server I keep getting a

Hi all,

i want to ask if anyone have an experience with huawei cmts MA5633 / MA5833.
I need a reliable cheap low power consumption docsis 3.1 cmts
I also want to know it it is possivle to buy them in europe?
Anyone can help?

thanx
dave

Is there a standard way to disable the LAN management ip on cable modems, I need to disable the 192.168.100.1 address. This causes issues with Plume deployments (When cable modem reboots, plume pod sees 192.168.100.1 ip and changes to Bridge mode on some occassions, rather than router mode). Please let me know if it is possible to disable (mostly Arris brand modems) and the best way to do so if possible.

Hello,

i want to enable more DS RF channels into one service group and mac domain to have more capacity that basich 32 primary channels offers.
Is there any way to set up / add more RF channels and include them to same service group/ docsis mac?

I can see the QAM interface provides to configure 48 chanels, but i cant add more than 32 into service group.

I am receiving this error message:

CASA-C100G(conf-if-mac 9)# downstream 33 interface qam 0/7/32
Invalid channel id 33 as primary, channel should be 0-31.

The version I have is
saRg MODULE-IDENTITY
LAST-UPDATED "201505260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "support.cisco.com"
DESCRIPTION
"Controls the behavior of router/wireless functions.
Can be part of CM configuration file."

-- history

REVISION "201505260000Z"
DESCRIPTION "Initial release of reduced-set module for releases based on BFC 5.7.x."

::= { saModules 2 }

I need to upgrade DOCSIS transponder 3.1 firmware on Alpha XM3.1-905-HP power supply, via SFP transceiver, ethernet cable and TFTP server on personal computer.

I've installed SolarWinds TFTP server on a PC, configured server bindings to IP address, and copied firmware and config file into TFTP default folder (C:\TFTP-Root).

The IP address of network adapter assigned to TFTP server is set to 192.168.2.20, subnet mask is set to 255.255.255.0.

Hi

Please help me With which username and password can I access the configuration page through the wan IP of the Hitron cable modem model CGN3ACSMR

Through the LAN IP I can access the configuration page with this data
user name: cusadmin
Password: password

Please help me with the username and password information to access the wan IP

Hello All,
Can anyone please confirm if it is possible to get a response for a snmpwalk command on emta/edva interface?

Hi

I want to program a system to know the power levels of the cable modems in the CMTS, can you help me by indicating the best way to do this?

with snmp or with telnet ?

Has anyone developed something similar?

please help me