Docsis chat

I am trying to install docsis-server-2.0.4 on Fedora 7. but i have this problem when I run the make command.

[root@localhost docsis-server-2.0.4]# make
gcc -g -O2 -fPIC -I. -c -o libdocsis.o libdocsis.c
libdocsis.c:44:38: error: net-snmp/net-snmp-config.h: No such file or directory
libdocsis.c:45:32: error: net-snmp/utilities.h: No such file or directory
libdocsis.c:46:33: error: net-snmp/config_api.h: No such file or directory
libdocsis.c:47:33: error: net-snmp/output_api.h: No such file or directory
libdocsis.c:48:30: error: net-snmp/mib_api.h: No such file or directory

Hi, everyone. I'm trying to make work together arris emtas (tm501b) and asterisk (using SIP). And I have a lot of problems. The major one is with asteriks 1.4 at some moment EMTA hangs. Only cold restart can resolve the problem for some time.
If anyone has achieved to make those two working together, please help me out

Could someone please post the actual steps a CM goes through to become registered? Doesn't it have to download two files? One that has the macs listed and another to set the up and down speeds? Or how do you add more than one modem at different speeds if all the modems download one file?

Could someone please help me with setting this unit up properly? I have the unit installed and my test modem talks to the DHCP server, obtains an IP, talks to the TFTP server, obtains the file, and then fails on registration. I purchased a copy of LCn Provisioning software to help provision the modems, but maybe the software is to old for the modems?

We have now acquired a few gateway's that are using the CMTS 1500. I can not find any documentation for the 1500 was wondering if anyone here has any they could put up for download. I have searched the Arris site and all I get is the links to the Training options. This is not a 1000, this looks nothing like a 1000 when you are logged into it. They are setup and running, but our monitoring platform relies on snmp traps to do part of its job. When I enter the info to specify a trap server I get this error "Unrecognizable octet string, reenter".

We are looking for CM provisoning software.We are using Cisco UBR7246 CMTS and Motorola SB4100 modems.
Any suggestion would be welcome. We are looking for software with basic features. No expensive software solutions.

i have created web interface using snmp query, for monitoring cable modems. now i am trying to use this interface with cmts arris 1000 (nortel/cornerstone 1000) and i have a problem. most of function works great but i cant get value for cable modem upstream snr (docsIfCmtsCmStatusSignalNoise MIB). result for every modem is zero so i believe there is no response at all, cause description of docsIfCmtsCmStatusSignalNoise is: "Signal/Noise ratio as perceived for upstream data from this Cable Modem. If the Signal/Noise is unknown, this object returns a value of zero."

Hi,

I have a CMTS 1000. Or maybe it's a 1100 or 1500. How do I tell? Anyway, I had it to the point where the modem would get an IP, but not a config file. This is all just in a test environment. I use Debian Linux and DHCP. I've statically assigned my config file (cm1.md5) to the modem. I know the config file is good because I use it in other working environments. The bad part is that I've reset the CMTS to factory defaults and now I can't even get the moedm to get and IP address. Can anyone help me out?

Thanks,
emkowale

I am asking if someone can point me in the right direction to get a used CMTS up and running that I recently purchased. I found a long PDF manual on Nortel's website but it really doesn't help much because they want you to have LCn provisioning software which didn't come with this used unit. Furthermore, when I power it up, the LCD display just blinks a blank message that looks like this:
<-------->
<-------->
The SELECT, MODE, UP, DOWN button have no response. So I am wondering if this is a sign of a defect.

Thanks,

Thread7