Docsis chat

Hi

We use cable modem CISCO DPC3825 and it is very often that it is deconfigured and takes the default configuration.

with the default configuration is disabled the remote access and the management port changes to 8080

How can I enable remote acces using snmpset
what are the OIDs to use ?

Hi,

My question is: How many DS channels can I define in a bonding-group on BSR64000?

I bound 16 DS channels to the cable interfece 0/2:

interface cable 0/2
cable bind downstream 9/0/0,9/0/1,9/0/2,9/0/3,9/1/0,9/1/1,9/1/2,9/1/3,9/2/0,9/2/1,9/2/2,9/2/3,9/3/0,9/3/1,9/3/2,9/3/3

When I try to create a bonding-group with 16 chennels, then I got the next answer:

srm10:7A(config-if)# cable downstream bonding-group 1 9/0/0 9/0/1 9/0/2 9/0/3 9/1/0 9/1/1 9/1/2 9/1/3 9/2/0 9/2/1 9/2/2 9/2/3 9/3/0 9/3/1 9/3/2 9/3/3

Too many arguments on command line

It's been a while since really working with the C4, but I've setup 32x4 bonding and it's working just fine.
my question relates to remote-query. it only give me the levels on the primary channels, not all the channels.
C4# show cable modem 14c0.3ec4.cc6d
Dec 26 21:15:41

Hi All!

Does someone have FW version 7 or 9 or newer for gen1 Arris E6000?

If yes, please email me tomdecker77 at gmail dot com

Thank you!

Hi,

if have a used ubr7246vxr with 2x Mc28U card and some motorolla Sb5101i ready for use.
100% testesd - DL/UL speed per modem 40/18MBps

any interesst ?

Hello Experts

I am a bit new to the cable industry of which my friend is more advance. The problem that is being experienced is that he has a Docsis 1 CMTS with 50 modems connected and working and he purchase a Docsis 2 CMTS system of which he wants to have both on the same network. One has a 357MHz frequency while the other has a 459MHz frequency.

Cisco EPC3008 modem, SNMP issue: some private enterprises OIDs don't allow configuration from SNMP commands.
Although it must be configurable, in particular:

saCmMtaCliAccessType.0 disable(0)
saCmMtaCliAccessInterface.0
saCmMtaCliAccessUsername.0
saCmMtaCliAccessPassword.0

How it can be configured?
Also, a lot of Broadcom private enterprises OIDs are hidden when snmpwalk.

Hi,

we are using the old cacti system for monitoring signal and BW parameters from modems. We are using this for over 15 years with THG 541 modems.
But we are on Docsis 3 now and using Ubee EVW32C modems.

Hi,

does anybody of you know or could check the "CPU utilization" on the CASA C3200 CMTS? We are using two of them right now.
On both of them is approx 900 modems, but the difference is in the subscriber's packets/bandwidth.

On one of them, we have the "biggest" packet 25/5Mbit and half of the subscribers are on that 25/5 packet. There we have just 4 DS bonding channels.
On the other CMTS is the highest packet 300/15 Mbit and also half of the subscribers have that packet. There we have 8 DS bonding channels, and in some MAC DOMAIN also 16 DS bonding channels.

kwesibrunee

Know your in the vendor space. In fact, I worked a long time ago where I believe your still at. Would like to email you privately about diagnostic modems but I cant find a way to private message you here.

Drop me a note at proairpass at yahoo.com

Tom