Does this card offer any benefits if you are not planning on going to Docsis3.0 right now. We are currently using 2x8 cards and are beginning to burn 1 downstream port for 1 node due to bandwidth usage. Could this card assist in giving us more DS ports to feed some of these existing nodes on other cards? If so and we are not going to upgrade to a Docsis 3.0 network at this time does that limit the card to only 8 downstream ports in our situation or would we still be able to use 32?
I have a new issue with my config files. I cannot get BPI to work with Arris 1500 CMTS. I am using Motorola SB5101E and Thomson TCM420 modems. Modems cannot connect, it gets stuck at TFTP Read Request message in CMTS. Modem log for Motorola shows "DHCP WARNING - Non-critical field invalid in response and TFTP file complete - but missing mandatory TLV", while modem log for Thomson, in addition to these 2 messages shows "TLV-11 - Failed to set duplicate elements".
This is my CM config file:
FileVersion = Version 6.0
01 (New Downstream Frequency) = 399250000
My company need a Terayon smts and a switch as soon as possible, to use in a cablenet in Norway. Does anyone have these two item for sale? Please let us know. Write to us at firmapost@optonet.no.
Is there a way around having to clone the modem MAC address in cable/dsl nat routers? Are the conditions different when using static IP addresses for both the modem and the cable/dsl router? Do different cable/dsl routers present different problems for DOCSIS modems? I have 60 of these things to set up for a particular application and the MAC cloning aspect is a real pita part of the process. Sure would like to find a way around it if possible.
We don't have this problem with our LANcity legacy modems.
Hello,
I am trying to set up new part of Thomson modems with Arris 1500 station, but modems stuck at DISCOVER/OFFER loop infinitely, while Arris modems works perfectly. Moreover, Thomsons behave completly strangely: 4 of 20 new modems of new part work nice, without any problems, while 16 other stuck at dhcp discover/offer stage.
dhcpd.conf:
[code]subnet 10.3.0.0 netmask 255.255.252.0 {
option routers 10.3.0.3;
next-server 10.3.0.3;
host 10.3.0.81 {
hardware ethernet xx:xx:xx:xx:xx:xx;
Hello,
I am trying to update firmware in Surfboard 5101e modems. I created config file with Motorola CVC's, update server info, filenames and everything, but test modem stays at "TFTP file request" and then reboots. Modem log says "Critical error - TFTP file complete - but missing mandatory TLV and DHCP WARNING - Non-critical field invalid in response".
Attached is text version of config file, as generated by giconfig.
