On CMTS to get DS SNR and US PWR you need use remoteQuery functionality - thats pretty easy on CISCO CMTS. US SNR and DS PWR CMTS will provide trough standard RF MIBs, like these ones ours colleagues mentioned.
--
affordable, robust provisioning and monitoring software for DOCSIS networks: dps.cable@gmail.com
rx: 1.3.6.1.2.1.10.127.1.1.1.1.6.3
tx: 1.3.6.1.2.1.10.127.1.2.2.1.3.2
result/10;
Hi!
DOCS-IF-MIB::docsIfCmtsCmStatusRxPower shows the signal level from the modem when it hits the CMTS.
/Fredrik
On CMTS to get DS SNR and US PWR you need use remoteQuery functionality - thats pretty easy on CISCO CMTS. US SNR and DS PWR CMTS will provide trough standard RF MIBs, like these ones ours colleagues mentioned.
--
affordable, robust provisioning and monitoring software for DOCSIS networks: dps.cable@gmail.com