Docsis chat

its possible to route through two cable modems? as a kind of VPN.
Using a CMTS that has the ability to route as the UBR.

Modems come online but will not pass Ethernet traffic. Ethernet is programmed for 1 which is active.
Any ideas?
Thanks

I have a bunch of these modems that I want to load the SIP firmware on. I want to use them with my own asterisk solution. I have already applied the asterisk patches to my servers I just have no idea how to:

1. Acquire the required software / firmware (bought second hand off ebay and Arris wont help)
2. Create or push it to the device

I have configured Arris properly but i have one problem with dhcpd.

I get this error all the time.

Jul 12 04:51:01 linux-0zbt dhcpd: DHCPDISCOVER from 00:1e:6b:1e:31:2e via 10.248.0.252: network 10.248.0/24: no free leases
Jul 12 04:51:05 linux-0zbt dhcpd: DHCPDISCOVER from 00:1e:6b:1e:31:2e via 10.248.0.252: network 10.248.0/24: no free leases
Jul 12 04:51:14 linux-0zbt dhcpd: DHCPDISCOVER from 00:1e:6b:1e:31:2e via 10.248.0.252: network 10.248.0/24: no free leases

Hi everybody!
I have a big problem with my CMTS Cornerstone 1500. Before 4 days, it was necessary to reset the mashine.
After reset everething is going down.:( All adjustment going out.
We are small ISP with very small subscribers.There is 160 modems.I`m not specialist of CMTS andd that was so hard to me, to set right parameters.
Please help me to set right. I`ve not configuration file. :( This is disaster..... I must say: I`m woman :).There is my setting for up and downstream.(Two upstreams 4 and 5)

Downstream:
frequency:423000000 herz
width: 6000000 herz
modulation: qam256

We recently bought a used arris c3, it has the ospf license installed. We placed a new configuration in the cmts, and all the cable modems get provisioned but they don't access the internet.

We make ping within the cmts cli to any internet ip and get response, we can also ping any cpe from the cmts. But from the cpe we can only ping the cmts not any internet ip.

Unfortunately we don't have any arris support contract.

If someone could please help us!!

Thanks,

Adrian

We have a 7246 in our lab and we've turned on equalization but our snmp request keep returning 0 for the equalizer data. Any suggestions.

Hi

i have problems provisioning cable modems, that only appears initializing but never pass the state to registered, i'm using motorola cable modems docsis 1.0 with cmts terayon bw3400, i have to make something more ???

that is my configuration of cmts and script for generate a binary file:

interface access 0
cable helper-address 12.132.0.1
ip address 10.10.10.1 255.255.255.0
ip address 192.168.100.1 255.255.255.0 secondary
cable dhcp-giaddr policy
!
cable privacy root-certificate 1
interface cable 1
no shutdown
cable downstream frequency 489000000

Hi!!

I'm New in that, i was configure a Harris Cmts, that works in Layer2, and in this moment i'm trying to config a Terayon Cmts in Layer2 or Dhcp Relay, but i don't know how to make that configuration, please help me...

If you are a small cable operator with a vision to provide low cost reliable VoIP service to about 200-300 of your customers, this offer is for you.

We are seeking 3 small cable operators who expect no more than 200-300 VoIP subscribers max to assist us in a free year long trial of our VoIP switch. These operators need to have no prior VoIP service in their product line.

Our VoIP switch currently has a full list of residential features and we plan to build business features over 6-9 months.