Docsis chat

Hi,
Few years ago I bought few cable modems including Arris TM602g units. I never tried the idea of provide telephone service until now.
I'm having trouble provisioning the eMTA side, and I think is because I’m trying to provisioning SIP on those cable modems.
Seems that the cable modem firmware has to be change to make it work on SIP provisioning and that part has to be provide by Arris itself.
I bought it to an Arris re-seller. I want to know if you can help me getting this eMTA Firmware thing on the way.

Dear,

            have a cisco cmts ubr7246vxr model with 2 plates mc28u and npe-g1 plate. he is rebooting alone. in Annex I took the information about these crash. does anyone know what could it be?

Thank you, Flavio.

I took over a cable plant about 1 year ago, they only had Docsis 1.X and 2.0 running. We wanted to upgraded to DOCSIS 3.0. Our CTMS and cable modems we got seem to work fine for 3.0. But I'm noticing in our plant that some DOCSIS 3.0 modems don't bond all 5 channels like they should. Reading over the DCOSIS 3.0 specs it looks like the frequency range is 108 - 1ghz.

My Frequency are as follows
99
105
111
117

237

Anybody out there ever set up Docsis30 Loadbalancing based on Cisco modem-count loadbalancing?
The command "cable load-balance docsis30-enable" was introduced in IOS SCF.
Now i would like to use the 'dynamic bonding change' for D30 modem. So far I've set up the following:

cable load-balance docsis30-enable
!
cable load-balance docsis-group FN 3 MD Cable6/0/1
no disable
method utilization us-method utilization
interval 30
threshold load 10
threshold load minimum 3
threshold stability 50


Hi there,

I just want to revive some Motorola sbv5121e voip cable modems.
I have read many articles on this site, but the mta part will not work,
and i ran out of ideas. I could use a little help.

Here is the test dhcpd.conf file:

authoritative;
allow leasequery;
ddns-update-style none;
ignore client-updates;
next-server 192.168.33.1;
option domain-name-servers 192.168.33.3;
option domain-name "mta.domains.net";
option tftp-server-name "192.168.33.1";

I would like to don't have any wideband capable modem in only one freq. and I tried to solve with thew command 'Cable Wideband Autoreset' but so far without sucess.

how I define the qos profile to a cable modem?

Hello,

I need to figure out the MTA OnHook/OffHook Status of the two lines via SNMP

I got the following information from a friend, but did not work for me. I got no output

.1.3.6.1.4.1.2863.78.3.2.1.6 tmmMtaEndPntHookStatus onHook->0 offHook->1

Does someone know the OID which I need to ust to get the status via SNMP?

Thanks

Harald

I'm having some problems getting remote-query working on a ubr7246. I've got the cmts set to use remote-query, and I'm sure I'm using the right community as I can poll the modems via other snmp utilities. The subnet allowed to access snmp defined in the modem includes the remote-query src ip that I'm using.

Debugging snmp on the CMTS yields:

5d22h: v1 packet
5d22h: community string: cm_client_skinner
5d22h:
For IP address 172.31.32.23
5d22h:
SNMP proxy exec got event,but queue is empty

'show snmp sessions' says:

Hi guys,
hope you're OK today. I have a question about DOCSIS 3.0 config file.
As we know, Cable modem DOCSIS 3.0 used config file D1.1. The different Cable modem D3.0 has a capability to use channel bonding. How to make it different between DOCSIS 1.1 and 3.0.