Hi all,
I need help with cmts motorola bsr2000. I have cmts, a need get to cmts to default state. cmts arrived with clean CF card, and with password to "privileged exec mode". I finding out password (unfortunately).
I made next procedure. during cmts booting I press key on state "Press any key to stop auto-boot", next I press E (erase nvram flash file system) and next R (reboot with lear(longer)). Now cmts during booting finished on text: Error loadinf file: errno = 0x3c. Cant load boot file.
I need boot image or boot files, which I copy to CF card for correctly booting.
(analogy arrisC3?).
Can someone help me and send me files to CF card for booting?
CAN YOU HELP ME? Thank you
Sorry for my english.
Martin
Hi Martin
you need to post your email address..
What do you get for an output when you type L and p ?
~Carl
thank you for reply, my addres is fireblade@seznam.cz
I not understand exactly.. how output? Please precise formulation.
I think that I need vxWorks file..
when your at the main prompt, type ?
This will give all the options, you will need to copy the image to the flash card. make sure the unit is off when you remove or add the flash card.
p for print will show what the current settings are for the unit to boot. type in c for change and hit enter. first will be the location, example NVRAM: type in FLASH: and hit enter. hit enter until you get to the file name or image and type in the name of the image. hit enter until your back at the prompt then type in @
this will start the loading of the image. log in, copy the image to nvram, type in boot system nvram: enter.
make any changes you need and copy run start. reload to confirm it boots and runs.
~Carl
I use your procedure:
copy image to CF card, interupt booting and changed boot parametres:
boot device to FLASH: (from marfec)
boot image to appImage...
next I press G (because @ inst working)
CMTS BOOTING!!!
And I have question what do now (exactly command by command).
I try this:
MOT#copy running-config startup-config
MOT#copy running-config nvram:
Destination filename [startup-config]?
Is this correct?
MOT#show boot
Boot location currently set to nvram:appImage_100P5907TRCU.bin
Because if i changed this parameter to bootImage.bin.bsr2k.1033, cmts isnt booting. File bootImage.bin.bsr2k.1033 I not used..
My next question, must return back boot paramteters which I changed before? I think press c during auto-boot..
NOW :
boot device : NVRAM:
unit number : 0
processor number : 0
file name : appImage_100P5907TRCU.bin
flags (f) : 0x2000
Sorry for my english and thank you very much for your help!!!!
Martin
the copy run start is after you've completed your config.
the boot side of things is fine. as for the bootimage, that's the bootrom. what would start the unit before it loads the image. that is not needed unless it's upgraded and that would be done after it's up and running
~Carl
Hi Carl,
Thanks for the explanation and assistance and email I upgrade boot ROM from 1.0.29 to 1.0.33.
MOT#show version
BSR 2000(tm) version 1.0.0P59.07.TRCU
Boot ROM : 1.0.33
Im not sure for response, I will ask other, please simply response:)
I CHANGED AUTO-BOOT CONFIG FROM
boot device : marfec
unit number: 0
processor number: 0
host name: host
file name: /User/vxWorks
inet on ethernet (e): 172.21.22.201:ffff0000
host inet (h): 172.2.1.1
gateway inet (g): 172.21.1.1
user (u): anonymous
ftp password (pw): ftp
flags (f): 0x0
target name (tn): targetname
TO THESE CONFIG
boot device : NVRAM:
unit number : 0
processor number : 0
file name : appImage_100P5907TRCU.bin
flags (f) : 0x2000
IT IS CORRECT AND I LEAVE IT:)
CARL...AGAIN - THANK, THANK YOU VERY MUCH..
You are CMTS Eng?
Sorry for my english and have a nice day. I have a nice day - thank.
### BOOT DUMP ###
BSR 2000 Power-On Diagnostics...
Board
Assembly PN = 520699-006-00
SN = J080301000462953
REV = N
Upper Level
Assembly PN = 520025-006-00
SN = J080310000463099
REV = H
BootROM Ver: 1.0.33 Created: Fri Apr 23 10:41:11 EDT 2010
1. CPU Section ...Passed
2. Memory Section ...Passed
3. I2C Section ...Passed
4. Network Section ...Passed
5. RF MAC Section ...Passed
6. RF Tx Section ...Passed
7. RF Rx Section ...Passed
BSR 2000 Passed All Power-On Diagnostics...
Exiting Diagnostics...
Checking Sector 115 for proper TFFS format header
flMount: iTL = 0, status = 0x0
Attaching to ATA disk device... usrAtaConfig succeeded
ataFormat: Volume FLASH: already formatted
VxWorks System Boot
Copyright 1984-2005 Wind River Systems, Inc.
System : Motorola BSR 2000
Version : VxWorks5.5.1
BSP version : 1.0/0
Creation date : Apr 23 2010, 10:42:31
Press any key to stop auto-boot...
0
auto-booting...
boot device : NVRAM:
unit number : 0
processor number : 0
file name : appImage_100P5907TRCU.bin
flags (f) : 0x2000
Start application from NVRAM:
Booting image appImage_100P5907TRCU.bin
cmtsDecompExtApp: Inflating image from 0x1c80f0f8 to 0x00200000, size 0x0041fd1c...
inflating image appImage_100P5907TRCU.bin success!
Starting at 0x200000...
Checking Sector 115 for proper TFFS format header
flMount: iTL = 0, status = 0x0
Attaching to ATA disk device... usrAtaConfig succeeded
ataFormat: Volume FLASH: already formatted
Adding 28167 symbols for standalone.
-> compiled @ Sun Nov 2 21:36:52 EST 2008
Initializing FPGA
FPGA Revision 0.220
FPGA ID c0de
BCM MAC revision 3214a3.
bcm3034Init: downstream driver(3040/0) 0x164193f0 created for mac0.
Device 3140 rev 3 driver created for mac/port=0/0.
Device 3140 rev 3 driver created for mac/port=0/1.
Device 3140 rev 3 driver created for mac/port=0/2.
Device 3140 rev 3 driver created for mac/port=0/3.
Device 3140 rev 3 driver created for mac/port=0/4.
Device 3140 rev 3 driver created for mac/port=0/5.
BCM3212 driver started: 0x16ab9110.
macName = 3212
BSR 2000(tm) version 1.0.0P59.07.TRCU
Copyright (c) 2005 by Motorola.
Compiled Sun Nov 2 21:36:52 EST 2008
MPC7447A processor with 512MB memory.
Boot ROM : 1.0.33
CPU : MPC7447A
Memory Size : 512 MB
Board Program ID : RD
Format Version : 11
Assembly Type : 39
Board Part Number : xxx
Board Serial Number : xxx
Board Rev : N
Upper Level Part Number : xxxx
Upper Level Serial Number : xxxx
Upper Level Rev : H
FPGA Revision : 0.220
System Up Time : 33 seconds
reload reason: reload command
MOT>
Hi Martin
from the output posted, it's all set. no changes needed
~Carl
Hi,
how did you upgrade boot ROM? Please tell me the procedure.
Thank you very much
Milan
Hi all,
Please if anyone knows where to download boot rom's, application images and fpga images for the MOTOROLA CMTS BSR 2000.
There was good download and documentation site docsis.dobroe.ru/DOCSIS but it isnt working anymore.
at the moment i neet the boot ROM image 1.0.29. my emais is inel_mk@yahoo.com so if anyone has it please send
thanks
HELP here also!! We need a copy of the latest BootRom for BSR2000. Email address: lnorman@cablesight.com . Thank You MUCH for help.
Hi tanks for your time, can you send me te boot imagen please ? fjuarezp@gmail.com
Best Regards