Docsis chat

Anyone got the MIB files for Cisco EPC3925, EPC3940 and 3940L cable-modems or know from where they can be downloaded ?

I need them for http://librenms.org

Thanks in advance...

Hi all,

I use tcl write a mib browser. It can run on windows and linux.
If you are looking for a free mib browser, maybe these one can do something.

This tool is open source, you can download at below path.
https://github.com/jianiau/Tcl-MIBBrowser

Please let me know if anyone has suggestion or find any issue.
Hope this tool is useful.

Thanks

We are getting below error logs & many of the modems are going init0
Please find the logs from DPE (PCP server)

Looking for version 3.10.1319 for U10C035 modems.

-Tom

Hi,

My CMTS config is attached. I want my CPEs to be able to communicate with devices which are in the same network as my gigaether interface. The subnet of my GigE interface is 172.16.1.0/24 and I want my CPEs to get IP addresses in the same range.

Below are the configs for GigE and Cable interfaces:

interface gigaether 15/0
ip address 172.16.1.46 255.255.255.0
no shutdown
no ip redirects
no ip unreachables

Hello Everyone,

I have racked my brain for weeks looking at all the forum posts and reading white papers and have hit a wall. I am unable to hit above 95Mb. The modem seems to burst above it however it doesnt sustain it. I am beginning to think its my modem config file that is the issue.

If anyone can look over this would be greatly appreciated. And if there is a modem file that should allow me to reach the full 320Mb would be great. This the config I currently have :

Anybody here use a CASA?

If you've bought a CASA C40G or C100G, what did it cost? Cost for Chassis? Cost per card?

This whole industry is very tight-lipped about costs until the sales guy comes to town.

Hi all,

We have just recently purchased a solution to provide TV, internet and phones over DOCSIS.

we are functioning for the most part but I am having some quirky issues with the ARRIS-TG862G

It appears that it can only accept one incoming call at a time. so there is no call waiting or 3 way calling

and another quirk i found is that for access codes you cannot dial more than 2 digits example when i press *123 which is for voicemail. It will only dial *12.
the 3rd digit is left out.

Hello all,

I was wondering if anyone knew where I could find the image referred to in this command to test this card? (MC20x20-20D)
It appears to be named ubr10k-fdiagslc-mz.7_0.bin

Router#diagnostic start subslot 8/0 test ?
% No diagnostic test is available for Subslot 8/0

NOTE: The Field Diagnostic test suite is supported for this line card.
To run Field Diagnostic tests, download the Field Diagnostic image from
cisco.com to a TFTP server or a flash card and enter the "diagnostic
load" command.

https://iphostmonitor.com

Anybody using this for their DOCSIS Network? Looks like this is geared more towards an IP S/R network.