Docsis chat

Has anyone used arris servassure platform with cisco cmts?

I got a few Ubee EVM3236 voice cable modems and now testing them. They came without complete documentation, does anyone know how to get a full level Telnet access? I can access only limited Telnet interface (technician), configurable via MIBs, but need the full (Admin) Telnet access. The admin level seems accessible with pass, generated by password of the day tool (PoTD).
Can someone mail this PoTD utility please? planar5 at yahoo.com

Goodnight. The reason for my message is to ask for help for my aproving, I want to do it in CentOs. the question is what programs will you use for example the version of Centos? the DHCP version? the TFTP version. How would I do my NAT? Could it be on Shoreline? considering this, my network diagram would be as follows. CMTS Network: 172.17.0.2/24 Server Network: 172.17.0.1/24 CM Network: 10.50.0.1/16 CPE Network: 172.16.0.1/16 having as CMTS an Arris C3 maybe you could help me with an example configuration. I'm desperate please tell me what to do, I'm almost out of time. !!

Greetings all users,

I wanted to ask you what would be the best way to get the data rates that a modem is using like : Download traffic speed and upload traffic speed to the ubr10k cmts with different modems/gateways.

CMTS: Motorola BSR 64000
Firmware: 8.1.0.1
Supervisor cards: SRM10G
Downstream cards: TXPlus
Upstream cards: RX48
Bonding groups: 32x4

We are seeing some CM8200 modems getting stuck in dhcp(ack) when registering. We see the following in the logs:

RCP Ignored: BondingCapable Modem xxxx.xxxx.xxxx can't register as bonded

Buenas noches, tengo un cmts y proveo internet quiero aumentar a 15 megas la bajada y 8 megas la subida me podrian ayudar para configurar mi archivo 10megas.cm en las lineas de abajo dejo mi configuracion.

Hi all,

I configured, according to the manual, the rules, policies and loadbalance-groups all the parameters so that the CMTS did the balance but it can't. i need your help to determinate what's happen!
add the configuration

Hi,

anyone here willing to share firmware for Cisco EPC3010 newer than e3000-c1000r5593-140829c? e3000-c1000r5593-140829c causes some problems with cbr-8 (some modems restart in a loop after 1 minute uptime with T3 touts in log).

thanks in advance
-m

Can you help me with the configuration of the console cable for cmts 64000 motorola

I'm configuring a BSR 64k in a test environment. I have a provisioning server running DHCP, TFTP, and is also my gateway router. That IP is 172.16.0.1

running config is here: https://pastebin.com/R7ZCgkx8
various "show" commands here: https://pastebin.com/UQq13tJV

I have a cable modem connected, it locks to downstream and upstream fine, but gets stuck at init(rc). DHCP requests are not being forwarded to the server, I'm not seeing any DHCP traffic in server logs.