Docsis chat

I have a problem with load balance with dcc, I use Cisco Ubr 10K with IOS release 12.2(33)SCC7, the cable modem still go offline if I use dcc init tech 4, does IOS 12.2(33)SCC7 support for dcc load balance? or any one have experience to use dcc load balance ? can u share your configuration please? I need if cable modem change the channel cause load balance function work, it will go directly to use new channel without re registration or rangging again.

Thank for you help!

Hello,

I have a UBR7246 and I get slow upload speeds for everyone. It's not RF and it's not our ISP's bandwidth. It's either the modem config file or the CMTS config. We have about 30 cable modems on this CMTS. From what I know, everyone has the same problem. If I have them go to speedtest.net they get ping around 30ms, downloads and around 10MB and up at about 0.24MB! The strange thing is that the Hulu people aren't complaining. The modem config file and the cable interface portion of the CMTS file are below. Ideas are help are greatly appreciated.

Hi there,

I'm a newby in this DOCSIS and Cable world, so don't hesitate to correct any of my flaws. I was wondering what's the best frequency you could/should use in your upstream? I want to scale for two stacked frequencies afterwards, but for now, let me know which is the best for one channel (my upper limit is 42 MHz because of physical limitations).

It depends on each node condition or you could use one generic frequency for all your US?

Thanks in advance.

someone know about CMTS PC-Based http://www.c9networks.com/products.html ?

Hi,

I am using DOCSIS 1.0. .Since downstream modulation is 256QAM.
This way I can get Max 37 mbps throughput.Now i have added new downstream card with New downstream frequency (different from previous one).Now can i multiplex both the downstream and feed to single transmitter?

Hi everyone,

i would like to know if you have any idea about how to "build" kind of simple CMTS environment for using in laboratory. something
like a card (ethernet -> coax? pci? usb?)... do you know if have any product like that?

because in my project, i need to provide internet access for cable modem like a SVG1202[1]

Hi,

Did some body already "play" with the DOCSIS options 24 with 22 and 25 with 23?

I try and try to fix somes priorisation and I got many problem to tweak the options and finished by having 3 definitions:

Hi,

i have problem with config file on epc2425.

SnmpMibObject saRgDot11BssSecurityMode.32 Integer 7; /* wpaWpa2Psk */
SnmpMibObject saRgDot11WpaAlgorithm.32 Integer 2; /* tkipPlusAes */
SnmpMibObject saRgDot11WpaPreSharedKey.32 String "qwerty1234567890" ;
SnmpMibObject saRgDot11ApplySettings.0 Integer 1; /* true */

If i set this mibs in config file to upload to epc2425 - modem don't change this part. But if i gave it by snmpset:

I am using a linux box to reset some promlematic modems using http://www.net-snmp.org/wiki/index.php/TUT:snmpset but i keep getting need value when i use the docsisdevresetnow. Is there anyone on the forum that has an e?amle for me to review.?

Hello, The file is from Arris modem.

Just wanted to know about the Download and Upload Value and Info about this file and how can i change it to the bigger or lower value.
[code]