Docsis chat

Necesito ayuda con un cmts motorola BSR1000, no puedo ingresar a la configuracion, se queda el prompt en "bsr1k_d>" le pongo enable y me pide password, al revisar la configuracion veo que tiene el usuario sysadmin con el mismo password, pero al poner ese password no me permite el ingreso, me dice que "Bad Passwords", espero y alguien me pueda ayudar, saludos.

BSR 1000R(tm) version 2.0.1.14.PRRU
Copyright (c) 2002 by Motorola.
Compiled Friday, August 28, 2009 12:43:31 PM EDT
MPC750 processor with 128MB memory.

Does anyone have any new(er) software for the DPX2203? We have a few of these deployed and they are currently running v1.1.2r1151-080311. Any help would be appreciated. I am also trying to enable the various webpages and can't find any docs on how to do this.

Has anyone ever seen any issues at all with Sonicwall Routers behind cable modems after changing from any other CMTS into an Arris C4c CMTS?

Greetings we can supply the following from stock:

Motorola APEX1500 Edge QAM. Includes one APEX chassis, one AC power supply module, six 2x8 QAM modules.

PN: 573209-003

$7900.00ea used, tested working with 90 day warranty. Thanks.

Kurt Paulus
NW Remarketing Inc
503.391.8191 x114
503.881.3578 Direct
503.375.8470fax
AOLIM- kurtnwr
kurt@nwrusa.com

Hi there,

We have struggled with a problem by using TM822 and CM820 with the updated version of FW 7.5.125 in 100% D2.0 environments. Specifically, the CM froze in init(o). After talking with technical guys at ARRIS we finally got a solution. It is necessary to set this OID to 0:

arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue.0 (Integer32) 0

I hope this information can help someone else.

Regards

Would it be correct, for better understanding and simplicity, to classify (split) all OID Identifiers into two main categories:
1. OIDs providing status (info) about something (provisioning, load, frequency,etc) Those OIDs are read-only access.
and
2. OIDs that allow to set or change specific parameters. Those OIDs are read-write access.

Hi!!!

i'm in trouble with some TLS dot1Q over a Cisco uBR 7225

my topology is the following
SWL3 --- uBR --- CM --- CPE

i'm using VLAN int 2717 in SWL3 and i need to reach the CPE.
these are the lines in the uBR

cable l2-vpn-service xconnect nsi dot1q
cable dot1q-vc-map H.H.H GigabitEthernet0/3 2717

and just enable the BPI in the DOCSIS file TLV29 and with some commands on cable interfaces

Hi,

Is there any benefits using Cisco MC-16S (Spectrum) instead of MC16C?

I personally have tried both Cisco Cards on my UBR7246VXR but I still don't find any difference.
I don't get the idea of the "spectrum group" could I have more upstream bandwidth using MAC-16S Cards and the
spectrum group?
I really would like to understand the differences here..

Regards,

Hi!

I got quite a few TCM471's with problematic behaviour - it stucks in init(io), probably due to plant quality problems (to be fixed ina future :mrgreen: ). I'd like to force those modems to not bond 8x4 but 8x1 but not by "no cable mtc-mode" because it affects ALL of the modems in a plant. Is there any specific OID for this CM or maybe some other way?

Thomson DOCSIS Cable Modem <>
UBR7225 with:
Cisco IOS Software, 7200 Software (UBR7200P-JK9SU2-M), Version 12.2(33)SCG7, RELEASE SOFTWARE (fc1)

Hello,

I use Motorola/CBN SVG6540E cable modems and they have a problem with wireless. The modem works fine a couple of days and then the wireless led light goes off and there is no wireless service anymore. I have tried to reset but no result. Do you have any idea what happens?

Regards,
Dori