Docsis chat

Hi there,

We got a new ubr10012 where we want to run 2 DTCC Card with IOS Version 12.3(17b)BC9.

We unpack and power up the machine. But the ubr seem to not recognize DTCC Card. Also, we tried to fix the card 1/1 and 2/1 in the config, but no result. We have also 1 card mc20x20v. We want to use the solution I-CMTS, without clock server. I read we need to put on the dtcc card first, otherwise, we cant use mc20x20 card.

Anyone have idea ? Below, config file (basic because we dont have access to advance config)

Hi.
I've got a little problem with TM822S SIP modem. In MTA config file is set:

VendorSpecific
{
VendorIdentifier 0x0000ca;
GenericTLV TlvCode 69 TlvStringZero "x.[t#]|*xx*.[t#]|#xx#.[t#]"; /* tlv length = 7 */
}

But it seems not to work properly. After *xx* is busy tone and after # also. What's wrong?

Hi Folks,

Here is my int bundle 1 config, I have a DHCP server for MTAs and another one for CPE hosts.

Hi!

I just got a bunch of CM820B modems. There is an interesting thing about those. I used to read by snmp an address from the CM's using:

snmpwalk -v1 -c community 10.130.0.123 .1.3.6.1.2.1.17.4.3.1 and I have always got smth like that:
(any modem, any vendor)

Hello everyone,

I have a problem with motorola BSR 1000, is quite similar to the one in this post http://docsis.org/node/457.

when I tryed to accces the BSR trough console, nothing appeared on the screen so i hit the reset button and this appeared.

VxWorks System Boot

Copyright 1984-1998 Wind River Systems, Inc.

CPU: RDN CMTS 740/750
Version: 5.4
BSP version: 1.1/0
Creation date: Jan 25 2002, 16:46:43

Hello everyone!

We have for sale,

3 Motorola BSR 2000 CMTS Router's $2100 USD each

1 Terayon BW 3230 Switch Control Unit and BW 3240 CMTS Servers Pair w/Manual $1500 USD

Please see http://look-sales.com for more info. We are flexible with the price and will except any reasonable offers.

We are located in Toronto, Canada and if you are in the area we can always arrange for you to drop by and see the equipment we have.

You can contact us at: sales@look-sales.com

Hello everyone.

I started getting this error and the QAMs are not seen anymore. I just recently swapped out the QAMs with known good ones from ones that were failing and everything looked fine with the known good ones until I rebooted the unit and now I am seeing the following on bootup.

Backplane of our BSR64K is a little damaged, but each card (SRM4, 2*TX32, HSIM) seems to boot normally (seen on serial port of each).
SRM has detected each card as I/O RM module with an x, but doesn't detect the type of card.

SRM is resetting regularly the HSIM and the two TX32 cards, with ipc problems.

Hi There,

We have obtained a number of these modems and I am looking for a provisioning guide or sample CM & MTA config files.
We provision our MTAs using a seperate MTA config file. We have Hitron and Technicolor eMTAs on our network with no issues.

Many thanks,

Q.