could someone that has the access to the Arris CM binary file generator provide the OIDs for arrisCmDevWrmProvFileName and arrisCmDevWrmProvFile? I am unable to find them anywhere.
I need assistance with my Docsis server 3.5. We use Arris C3 CMTS and surfboard motorola modems.
I had successfully installed the docsis server 3.5 on a debian linux operating system. My primary concern is that the modem only reaches INIT(o) and it stuck there forever. The docsis server has assigned ip address of the modem but could not finish the INIT(o).
Anybody who has a running MYSQL config of the docsis server 3.5?
And by the way, I tried sending emails to docsis_guy@accesscomm.ca but he's email is not anymore available. Anyone who has email with docsis_guy?
Thank Goodness I found this forum. I got shoved into this cable modem world and am trying to set up new s/w for provisioning and monitoring to work with our 2 cmts's
To explain our config a little on one cmts we have 2 cards ( 6 ports each) When I look in the cmts config I see the downstream on the 2 cards 3/0 and 4/0 are different 471000000 and 477000000. Does this have to be this way because in my new s/w Docsis service class I see only a place for 1 downstream freq or setting.
Thanks for any help folks, I still have a long way to go
Bobby
I'm getting fried from trying to implement some filters in my modem configs. Tried a variety of approaches and conventions and none like to play nice.
What am I missing besides more and more brain cells? Anyone see anything glaring that would keep modems from pulling this file?
I have been writing a CNR extension to override my BAC installation under specific conditions for the boot-file. I was having some issues where DOCSIS 1.1 and higher modems where they are not seeing my new file that was modified on the boot-file (option 67) then I realized after debugging on a packet level that BAC is also setting "dhcp-option-overload" sub-option "file" and that is being preferred. I need to know what "$response put" statement I need to modify that sub-option. My CNR Extension is in TCL if not obvious.
Any one here set up a billing system for docsis having a bras equipment. how did it setup containing both prepaid user at non prepaid user. is there any special config for the config file. thanks in advance
I'm having problems making the Arris CM550B work on a plant with DOCSIS-only downstreams.
The downstreams have assigned standard frequencies from the NTSC channel plan, and other CMs (e.g. Scientific Atlanta, e.g. EPC2203) find the channels without any probs and do come online.
We have an isolated router with a test network of just 5 meters of coax and 3 cable modems, so it's not plant issues, etc. It's not modulations too - tried QAM64 also.
This uBR7111, when connected to hyperterminal does not produce any output data on the monitor, no sign of boot-up, and, with exception of the power LED, none of the LEDs (ethernet, upstream, downtream, etc.) on the rear of the unit illuminate. The Power Supply output is correct and runs fine.
