Hi!
Why I can't set cable upstream max-ports to 0? It show me that valid values is from 1 to 8, but on another ubr10k i have following cfg and it's 0 in cable upstream max-ports on 8/0/4:
interface Cable8/0/0
downstream Integrated-Cable 8/0/0 rf-channel 0-3
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3
attributes 80000000
cable upstream 0 connector 0
cable upstream 0 spectrum-group 11
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 ingress-noise-cancellation 250
cable upstream 0 power-level -1
cable upstream 0 docsis-mode scdma
cable upstream 0 spreading-interval 16
cable upstream 0 codes-per-minislot 4
cable upstream 0 active-codes 112
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 321
cable upstream 0 equalization-coefficient
no cable upstream 0 shutdown
cable upstream 1 connector 1
cable upstream 1 spectrum-group 12
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 ingress-noise-cancellation 250
cable upstream 1 power-level -1
cable upstream 1 docsis-mode scdma
cable upstream 1 spreading-interval 16
cable upstream 1 codes-per-minislot 4
cable upstream 1 active-codes 112
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 321
cable upstream 1 equalization-coefficient
no cable upstream 1 shutdown
cable upstream 2 connector 2
cable upstream 2 spectrum-group 13
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 ingress-noise-cancellation 250
cable upstream 2 power-level -1
cable upstream 2 docsis-mode scdma
cable upstream 2 spreading-interval 16
cable upstream 2 codes-per-minislot 4
cable upstream 2 active-codes 112
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 321
cable upstream 2 equalization-coefficient
no cable upstream 2 shutdown
cable upstream 3 connector 3
cable upstream 3 spectrum-group 14
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 ingress-noise-cancellation 250
cable upstream 3 power-level -1
cable upstream 3 docsis-mode scdma
cable upstream 3 spreading-interval 16
cable upstream 3 codes-per-minislot 4
cable upstream 3 active-codes 112
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 321
cable upstream 3 equalization-coefficient
no cable upstream 3 shutdown
cable load-balance group 31
!
interface Cable8/0/1
downstream Integrated-Cable 8/0/1 rf-channel 0-3
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3
attributes 80000000
cable upstream 0 connector 4
cable upstream 0 spectrum-group 11
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 ingress-noise-cancellation 250
cable upstream 0 power-level -3
cable upstream 0 docsis-mode scdma
cable upstream 0 spreading-interval 16
cable upstream 0 codes-per-minislot 4
cable upstream 0 active-codes 112
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 321
cable upstream 0 equalization-coefficient
no cable upstream 0 shutdown
cable upstream 1 connector 5
cable upstream 1 spectrum-group 12
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 ingress-noise-cancellation 250
cable upstream 1 power-level -3
cable upstream 1 docsis-mode scdma
cable upstream 1 spreading-interval 16
cable upstream 1 codes-per-minislot 4
cable upstream 1 active-codes 112
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 321
cable upstream 1 equalization-coefficient
no cable upstream 1 shutdown
cable upstream 2 connector 6
cable upstream 2 spectrum-group 13
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 ingress-noise-cancellation 250
cable upstream 2 power-level -3
cable upstream 2 docsis-mode scdma
cable upstream 2 spreading-interval 16
cable upstream 2 codes-per-minislot 4
cable upstream 2 active-codes 112
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 321
cable upstream 2 equalization-coefficient
no cable upstream 2 shutdown
cable upstream 3 connector 7
cable upstream 3 spectrum-group 14
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 ingress-noise-cancellation 250
cable upstream 3 power-level -3
cable upstream 3 docsis-mode scdma
cable upstream 3 spreading-interval 16
cable upstream 3 codes-per-minislot 4
cable upstream 3 active-codes 112
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 321
cable upstream 3 equalization-coefficient
no cable upstream 3 shutdown
cable load-balance group 32
!
interface Cable8/0/2
downstream Integrated-Cable 8/0/2 rf-channel 0-3
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3
attributes 80000000
cable upstream 0 connector 8
cable upstream 0 spectrum-group 11
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 ingress-noise-cancellation 250
cable upstream 0 power-level -1
cable upstream 0 docsis-mode scdma
cable upstream 0 spreading-interval 16
cable upstream 0 codes-per-minislot 4
cable upstream 0 active-codes 112
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 321
cable upstream 0 equalization-coefficient
no cable upstream 0 shutdown
cable upstream 1 connector 9
cable upstream 1 spectrum-group 12
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 ingress-noise-cancellation 250
cable upstream 1 power-level -1
cable upstream 1 docsis-mode scdma
cable upstream 1 spreading-interval 16
cable upstream 1 codes-per-minislot 4
cable upstream 1 active-codes 112
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 321
cable upstream 1 equalization-coefficient
no cable upstream 1 shutdown
cable upstream 2 connector 10
cable upstream 2 spectrum-group 13
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 ingress-noise-cancellation 250
cable upstream 2 power-level -1
cable upstream 2 docsis-mode scdma
cable upstream 2 spreading-interval 16
cable upstream 2 codes-per-minislot 4
cable upstream 2 active-codes 112
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 321
cable upstream 2 equalization-coefficient
no cable upstream 2 shutdown
cable upstream 3 connector 11
cable upstream 3 spectrum-group 14
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 ingress-noise-cancellation 250
cable upstream 3 power-level -1
cable upstream 3 docsis-mode scdma
cable upstream 3 spreading-interval 16
cable upstream 3 codes-per-minislot 4
cable upstream 3 active-codes 112
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 321
cable upstream 3 equalization-coefficient
no cable upstream 3 shutdown
cable load-balance group 33
!
interface Cable8/0/3
downstream Integrated-Cable 8/0/3 rf-channel 0-3
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3
attributes 80000000
cable upstream 0 connector 12
cable upstream 0 spectrum-group 15
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 ingress-noise-cancellation 250
cable upstream 0 power-level -1
cable upstream 0 docsis-mode scdma
cable upstream 0 spreading-interval 16
cable upstream 0 codes-per-minislot 4
cable upstream 0 active-codes 112
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 321
cable upstream 0 equalization-coefficient
no cable upstream 0 shutdown
cable upstream 1 connector 13
cable upstream 1 spectrum-group 16
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 ingress-noise-cancellation 250
cable upstream 1 power-level -1
cable upstream 1 docsis-mode scdma
cable upstream 1 spreading-interval 16
cable upstream 1 codes-per-minislot 4
cable upstream 1 active-codes 112
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 321
cable upstream 1 equalization-coefficient
no cable upstream 1 shutdown
cable upstream 2 connector 14
cable upstream 2 spectrum-group 17
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 ingress-noise-cancellation 250
cable upstream 2 power-level -1
cable upstream 2 docsis-mode scdma
cable upstream 2 spreading-interval 16
cable upstream 2 codes-per-minislot 4
cable upstream 2 active-codes 112
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 321
cable upstream 2 equalization-coefficient
no cable upstream 2 shutdown
cable upstream 3 connector 15
cable upstream 3 spectrum-group 18
cable upstream 3 channel-width 6400000 6400000
cable upstream 3 ingress-noise-cancellation 250
cable upstream 3 power-level -1
cable upstream 3 docsis-mode scdma
cable upstream 3 spreading-interval 16
cable upstream 3 codes-per-minislot 4
cable upstream 3 active-codes 112
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 321
cable upstream 3 equalization-coefficient
no cable upstream 3 shutdown
cable load-balance group 34
!
interface Cable8/0/4
downstream Integrated-Cable 8/0/4 rf-channel 0-3
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 0
cable load-balance group 35
no upstream x connector y
Upstream 0 still stay even if "no" command apply
what is the current configuration cable 8/1/4
interface Cable8/1/4
no cable packet-cache
cable upstream max-ports 4
cable upstream 0 connector 16
cable upstream 0 channel-width 1600000 1600000
cable upstream 0 docsis-mode tdma
cable upstream 0 minislot-size 4
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 21
cable upstream 0 shutdown
cable upstream 1 connector 17
cable upstream 1 channel-width 1600000 1600000
cable upstream 1 docsis-mode tdma
cable upstream 1 minislot-size 4
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 21
cable upstream 1 shutdown
cable upstream 2 connector 18
cable upstream 2 channel-width 1600000 1600000
cable upstream 2 docsis-mode tdma
cable upstream 2 minislot-size 4
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 21
cable upstream 2 shutdown
cable upstream 3 connector 19
cable upstream 3 channel-width 1600000 1600000
cable upstream 3 docsis-mode tdma
cable upstream 3 minislot-size 4
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 21
cable upstream 3 shutdown
actually you can set
cable upstream max-ports 0:this is from my configuration:
interface Cable6/0/3
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 0
cable privacy bpi-plus-policy total-enforcement
!
interface Cable6/0/4
cable mtc-mode
no cable packet-cache
cable bundle 1
cable upstream max-ports 0
cable privacy bpi-plus-policy total-enforcement
but this may be due to the fact that I already consume all 20 upstreams on Cable6/0/0-2
Bit strange, it should work
I commonly do the max-ports 0 when configuring a card... Quickest way to blow away all the existing upstream configs!
Do both your UBR have the same IOS version?
Is it possible to have more than 8 US on 1 MAC Domain on any line cards?
UBR10K : 3G60 and 2020, max 8 US per mac domain (this is a big pain, especially on 3G60)
CBR8 : max 16 US per mac domain (so much better)
There are three FN with shared DS and separate US (one optical transmitter and different optical receivers).
One DS with 5x20 card (186 MHz) and 16 DS with SPA (338-458 MHz, 2x8 BG), 6 US with 5x20 card. Getting 8x2 for D3 modems. DTI server is available.
I want 8x4 in all FN.
Do I understand correctly that without changing the CMTS, i can only solve it by dividing it into different MD?
So you want to do : 1 mac domain with 3 FN. Each FN with 4 CH US.
If one node is larger (eg 200 users), and 2 nodes are smaller (eg 100 users each), you could do it by combining the US of 2 nodes :
Node 1 ---> Receiver1 ---> 2way splitter ---> CMTS US cable 0 and 2 (4 channels total)
Node 2 ----> Receiver2 ---+ 2way combiner ---> 2way splitter ---> CMTS cable 4 and 6 (4 channels total)
Node 3 ----> Receiver3 ---/
Node 1 has 4 US channels.
Node 2 and 3 would share and 2nd set of 4 US channels.
Downside of doing upstream combining is that noise from both nodes will combine. So noise in one node will affect the customers in other node.
If you don't want to combine any node upstreams, then your only option is to have 2 nodes per mac domain.
We will increase the number of MD's and continue to segment the network.