D3.0 - 8DS/4US No Bonding | docsis.org

You are here

D3.0 - 8DS/4US No Bonding

13 posts / 0 new
Last post
Endrit
D3.0 - 8DS/4US No Bonding

I am having trouble on cable modems that should bond 8 DS and 4 US.
The connect as a D2.0, so only 1 DS and 1 US.
I am using CASA C10G CMTS with QAM_8x96 as Downstream Linecards.
The same modems work fine if connected to other CMTS that uses DS_8x8 linecard.

What is confusing me more is that another CM capable to bond up to 16 DS , bonds all the DS and US.

In the MAC Domain i have configured :
....
downstream channel bonding
upstream channel bonding
....
same as in the service group .

Regards,
Endrit

cmcaldas
service group?

there's more than just the docsis-mac. can you post the show run (minus ip addresses and passwords) for review?

Endrit
D3.0 - 8DS/4US No Bonding

Hi ,

We have exchanged emails before, so i sent you there the configuration.

Kind Regards,
Endrit

wittmann
More as 32 DS in the MAC Domain?

Hi, did you have more as 32 DS in your MAC Domain configured?

Endrit
D3.0 - 8DS/4US No Bonding

Hi,

MAC Domain Configuration :

interface docsis-mac 9
no shutdown
sync-interval 10
insertion-interval 20
ucd-interval 1000
dhcp-authorization
invited-ranging-attempts 16
initial-tech unicast-ranging
initial-tech ofdma broadcast-ranging
no energy management
no battery backup
ip-provisioning-mode ipv4-only
no early-authentication-encryption
upstream extended-frequency-range
cm-status event report
no multicast-dsid-forward
downstream channel bonding
upstream channel bonding
tftp-enforce
no tftp-enforce src-interface
no tftp-proxy
no upstream drop classifier
no send udc rules
no dhcp-giaddr-primary
no dhcpv6-link-address-primary
no dhcp-insert
mdd interval 2000
sid-cluster max-requests 0
sid-cluster max-outstanding-bytes 0
sid-cluster max-total-bytes 0
sid-cluster max-time 0
max sid-cluster per-service-flow 2
ip bundle 1
downstream 1 interface qam 2/0/0
downstream 2 interface qam 2/0/1
downstream 3 interface qam 2/0/2
downstream 4 interface qam 2/0/3
downstream 5 interface qam 2/0/4
downstream 6 interface qam 2/0/5
downstream 7 interface qam 2/0/6
downstream 8 interface qam 2/0/7
downstream 9 interface qam 2/0/8
downstream 10 interface qam 2/0/9
downstream 11 interface qam 2/0/10
downstream 12 interface qam 2/0/11
downstream 13 interface qam 2/0/12
downstream 14 interface qam 2/0/13
downstream 15 interface qam 2/0/14
downstream 16 interface qam 2/0/15
downstream 17 interface qam 2/0/16
downstream 18 interface qam 2/0/17
downstream 19 interface qam 2/0/18
downstream 20 interface qam 2/0/19
downstream 21 interface qam 2/0/20
downstream 22 interface qam 2/0/21
downstream 23 interface qam 2/0/22
downstream 24 interface qam 2/0/23
downstream 25 interface qam 2/0/24
downstream 26 interface qam 2/0/25
downstream 27 interface qam 2/0/26
downstream 28 interface qam 2/0/27
downstream 29 interface qam 2/0/28
downstream 30 interface qam 2/0/29
downstream 31 interface qam 2/0/30
downstream 32 interface qam 2/0/31
upstream 1 interface upstream 11/0.0/0
upstream 2 interface upstream 11/0.1/0
upstream 3 interface upstream 11/0.2/0
upstream 4 interface upstream 11/0.3/0
mgmd ipv4 query-interval 125
mgmd ipv4 version 3
mgmd ipv4 max-query-response-time 100
mgmd ipv4 proxy-interface gige 6/0
mgmd ipv4 robustness 2
mgmd ipv4 last-member-query-interval 10
mgmd ipv4 shutdown
mgmd ipv6 query-interval 125
mgmd ipv6 version 2
mgmd ipv6 max-query-response-time 100
mgmd ipv6 proxy-interface gige 6/0
mgmd ipv6 robustness 2
mgmd ipv6 last-member-query-interval 10
mgmd ipv6 shutdown
router-advertisement enable
router-advertisement managed-flag true
router-advertisement other-config-flag true
privacy kek life-time 604800
privacy tek life-time 43200
cable cm-status report event-list 1,2,3,4,5,6,7,8,9,10
cable cm-status event 1 max-timer 2 max-number 8
cable cm-status event 2 max-timer 2 max-number 8
cable cm-status event 3 max-timer 2 max-number 8
cable cm-status event 4 max-timer 2 max-number 8
cable cm-status event 5 max-timer 2 max-number 8
cable cm-status event 6 max-timer 2 max-number 8
cable cm-status event 7 max-timer 2 max-number 8
cable cm-status event 8 max-timer 2 max-number 8
cable cm-status event 9 max-timer 2 max-number 8
cable cm-status event 10 max-timer 2 max-number 8
cable cm-status event 11 max-timer 2 max-number 8
cable cm-status event 12 max-timer 2 max-number 8
cable cm-status event 13 max-timer 2 max-number 8
cable cm-status event 14 max-timer 2 max-number 8
cable cm-status event 15 max-timer 2 max-number 8
cable cm-status event 16 max-timer 2 max-number 8
cable cm-status event 17 max-timer 2 max-number 8
cable cm-status event 18 max-timer 2 max-number 8
cable cm-status event 19 max-timer 2 max-number 8
cable cm-status event 20 max-timer 2 max-number 8
cable cm-status event 21 max-timer 2 max-number 8
cable cm-status event 22 max-timer 2 max-number 8
cable cm-status event 23 max-timer 2 max-number 8
cable cm-status event 24 max-timer 2 max-number 8
cable cm-status event 25 max-timer 2 max-number 8
cable cm-status event 26 max-timer 2 max-number 8
cable cm-status event 27 max-timer 2 max-number 8
no cm trap
cm trap interval 600
.......................................................................................

Service Group configuration :

service group 11.0
downstream channel bonding
upstream channel bonding
no upstream rfog-scheduler
qam 2/0/0 114000000 annex A 256qam dmac 9 UP
qam 2/0/1 122000000 annex A 256qam dmac 9 UP
qam 2/0/2 130000000 annex A 256qam dmac 9 UP
qam 2/0/3 138000000 annex A 256qam dmac 9 UP
qam 2/0/4 146000000 annex A 256qam dmac 9 UP
qam 2/0/5 154000000 annex A 256qam dmac 9 UP
qam 2/0/6 162000000 annex A 256qam dmac 9 UP
qam 2/0/7 170000000 annex A 256qam dmac 9 UP
qam 2/0/8 242000000 annex A 256qam dmac 9 UP
qam 2/0/9 250000000 annex A 256qam dmac 9 UP
qam 2/0/10 258000000 annex A 256qam dmac 9 UP
qam 2/0/11 266000000 annex A 256qam dmac 9 UP
qam 2/0/12 274000000 annex A 256qam dmac 9 UP
qam 2/0/13 282000000 annex A 256qam dmac 9 UP
qam 2/0/14 290000000 annex A 256qam dmac 9 UP
qam 2/0/15 298000000 annex A 256qam dmac 9 UP
qam 2/0/16 178000000 annex A 256qam dmac 9 UP
qam 2/0/17 186000000 annex A 256qam dmac 9 UP
qam 2/0/18 194000000 annex A 256qam dmac 9 UP
qam 2/0/19 202000000 annex A 256qam dmac 9 UP
qam 2/0/20 210000000 annex A 256qam dmac 9 UP
qam 2/0/21 218000000 annex A 256qam dmac 9 UP
qam 2/0/22 226000000 annex A 256qam dmac 9 UP
qam 2/0/23 234000000 annex A 256qam dmac 9 UP
qam 2/0/24 306000000 annex A 256qam dmac 9 UP
qam 2/0/25 314000000 annex A 256qam dmac 9 UP
qam 2/0/26 322000000 annex A 256qam dmac 9 UP
qam 2/0/27 330000000 annex A 256qam dmac 9 UP
qam 2/0/28 338000000 annex A 256qam dmac 9 UP
qam 2/0/29 346000000 annex A 256qam dmac 9 UP
qam 2/0/30 354000000 annex A 256qam dmac 9 UP
qam 2/0/31 362000000 annex A 256qam dmac 9 UP
upstream 11/0.0 58000000 3200000 prof 3,2 dmac 9 UP
upstream 11/0.1 51000000 3200000 prof 3,2 dmac 9 UP
upstream 11/0.2 43000000 3200000 prof 3,2 dmac 9 UP
upstream 11/0.3 36000000 3200000 prof 3,2 dmac 9 UP

cmcaldas suggested me to have up to 24 DS in the MAC-Domain and service group but the modems still don't bond.

Endrit.H

wittmann
RCP Verbose/Fragmentation enabled?

Hi, did you have RCP Verbose and Fragmentation enabled? If you have no static Bonding-Groups configured you should have RCP Verbose/Fragmentation enabled.

You can find it via show running command:


CMTS# show run | include rcp
cable mdd rcp fragment support
cable mdd rcp verbose support

Also you can debug the registration of the cable modem to take a look into the Registration Request and the CM capabilities (TLV5):


debug cable mac-address hhhh.hhhh.hhhh
debug cable registration
debug cable verbose
debug cable tlv
logging debugging
clear cable modem hhhh.hhhh.hhhh reset

to disable the debug output:


no logging

To disable the debug:


no debug all

Endrit
D3.0 - 8DS/4US No Bonding

HI wittmann,

Below is the config and the attached debug logs

CASA-C10G#show running-config | i rcp
cable mdd rcp fragment support
cable mdd rcp verbose support
CASA-C10G#
CASA-C10G#
CASA-C10G#
CASA-C10G#
CASA-C10G#show bonding-group
CASA-C10G#

CM goes online , after 3rd time failing.
You can see there are 4 logs : mac_cm_free_by_mac_addr,free cm .
First is when i reset it manually, then 3 other times.

CASA-C10G#s "MAC" verbose

MAC Address :"MAC"
IP Address :
MAC Status :online(pt)
CM-ID :10
Prim Sid :212
MAC Domain :9
Service-Group :11.0
Upstream :11/0.0/0
Downstream :2/0/0
Unusable channel list :
Upstream Channel :11/0.0/0
Ranging Status :RNG_SUCCESS
Upstream SNR (dB) :40.4
Received Power (dBmV) : 0.0
Reported Transmit Power (dBmV) :-
Peak Transmit Power (dBmV) :57.0
Phy Max Power (dBmV) :-
Minimum Transmit Power (dBmV) :20.0
Reported Max Total Power Output (dBmV) :-
Timing Offset :1341
Initial Timing Offset :1341
Received Power :0 dBmV
MAC Version :DOC3.0
Qos Provisioned Mode :DOC1.1
Enable DOCSIS2.0 Mode :Y
Extended Upstream Transmit Power :-
Initial Ranging Message :INIT-RNG-REQ
Registration Request Message :REG-REQ
Phy Operating Mode :atdma
Capabilities :{Frag=Y, Concat=Y, PHS=Y, Priv=BPI+}
Optional Filtering Support :{802.1P=N, 802.1Q=N}
BPI encrypt algorithm :DES-56
DSID Capability (Usage) :{Total=32(0), Reseq=16(0), Mcast=24(0), MDF=0}
Number of CPE IPs :1
CFG Max-IPV4-CPE :16
CFG Max-IPV6-CPE :16
CFG Max-IPV6-PD-CPE :3
Submgt Active :Off
Submgt Learnable :On
Submgt cm-filter-downstream :0
Submgt cm-filter-upstream :0
Submgt cpe-filter-downstream :0
Submgt cpe-filter-upstream :0
Submgt ps-filter-downstream :0
Submgt ps-filter-upstream :0
Submgt mta-filter-downstream :0
Submgt mta-filter-upstream :0
Submgt stb-filter-downstream :0
Submgt stb-filter-upstream :0
Errors :0 CRCs,0 HCSes
Stn Mtn Failures :0 aborts,0 exhausted
Total US Flows :1
Total DS Flows :1
Total US Data :67 packets,38932 bytes
US v6Data :15 packets,4087 bytes
Total US Throughput :0 kbits/sec,0 packets/sec
Total DS Data :32 packets,5571 bytes
DS v6Data :1 packets,122 bytes
Total DS Throughput :0 kbits/sec,0 packets/sec
Upstream Dropped Packets :0
Active Classifiers :0
DSA/DSX messages :permit all
DUT CMIM :0x0
Total Time Online :0 d, 0 h, 6 m, 21 s

Regards,
Endrit

File attachments: 
wittmann
CM doesn't like the REG-RSP?

So it seems that the CM somehow don't like the RNG-RSP:

In your logs:


CM Initialization Reason(57): 07

and one time:


CM Initialization Reason(57): 10

CM-SP-MULPIv3.0-C01-171207, "Table C–3 - Initialization Reasons and Codes" said Init-Code 7 == REG_RSP_NOT_OK and Init-Code 10 == TCS_FAILED_ON_ALL_US

Don't blame me for the usual question: You have the latest firmware on the cable modem and CMTS as well?

It's a little tricky. I propose also a look into the CLI of the cable modem. Maybe you'll find some good hints on the diagnostic outputs on the cable modem.

Sorry for no better hints.

Endrit
D3.0 - 8DS/4US No Bonding

Hi wittmann,

It's a bit confusing to me because the same modems on another C10G system using QAM_8x8 & UPS_16x4 & SMM_2x10G with Docsis-MAC configuration up to 24 DS works fine.

While now i am using C10G system, QAM_8x96 & UPS_16x4 & SMM_8x10G the problem occurs.

I dont't know if i have the latest software but it's the latest from what i got.
I also tried the same image that i use on a working C10G but still no success.

Edit*
Below are ther Cable modem logs :

2019-04-03 17:01:22 warning T203.0 MDD message timeout;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 17:01:21 error T201.0 Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 17:00:42 warning T203.0 MDD message timeout;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 17:00:42 error T201.0 Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 17:00:07 warning T203.0 MDD message timeout;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 17:00:05 error T201.0 Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 16:59:35 warning T203.0 MDD message timeout;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 16:59:33 error T201.0 Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 16:59:02 warning T203.0 MDD message timeout;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 16:59:01 error T201.0 Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 16:58:30 warning T203.0 MDD message timeout;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;
2019-04-03 16:58:30 error T201.0 Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=5c:35:3b:b8:3b:1b;CMTS-MAC=00:17:10:8c:29:4a;CM-QOS=1.1;CM-VER=3.0;

Thank you anyway for your time and help.

Kind Regards,
Endrit

wittmann
compare MDD between DS8x8 and DS8x96

What you can do is to compare the MDD output between DS8x8 and DS8x96 channels.

For your system with the example of the DS8x96:


show cable mdd msg downstream 2/0/0

Maybe you'll find a difference (missing TLV, whatever) between the MDD messages between DS8x8 and DS8x96 which leads you to a new track.

Best regards

Endrit
D3.0 - 8DS/4US No Bonding

Ok, i will look on to that.

Thank you for your time guys @wittmann & @cmcaldas.

Regards,
Endrit

Endrit
D3.0 - 8DS/4US No Bonding

There is an update to this issue.

I used SMM_2x10G instead of SMM_8x10G and the modems bonded normally.

Endrit

Juangarcia
Sorry, do you found the issue

Sorry, do you found the issue, i have the same problem, and other issue is the load balance dont work, this is my current config:

interface qam 0/0
interleave 16
power 520
channel 0 frequency 813000000
no channel 0 shutdown
channel 1 frequency 819000000
no channel 1 shutdown
channel 2 frequency 825000000
no channel 2 shutdown
channel 3 frequency 831000000
no channel 3 shutdown
no shutdown
!

interface qam 0/1
interleave 16
power 520
channel 0 frequency 837000000
no channel 0 shutdown
channel 1 frequency 843000000
no channel 1 shutdown
channel 2 frequency 849000000
no channel 2 shutdown
channel 3 frequency 855000000
no channel 3 shutdown
no shutdown

service group 1
qam 0/0/0
qam 0/0/1
qam 0/0/2
qam 0/0/3
qam 0/1/0
qam 0/1/1
qam 0/1/2
qam 0/1/3
upstream 3/0.0
upstream 3/1.0
upstream 3/2.0
upstream 3/3.0

interface docsis-mac 1
no shutdown
no dhcp-authorization
no early-authentication-encryption
no multicast-dsid-forward
no tftp-enforce
no tftp-proxy
ip bundle 1
downstream 1 interface qam 0/0/0
downstream 2 interface qam 0/0/1
downstream 3 interface qam 0/0/2
downstream 4 interface qam 0/0/3
downstream 5 interface qam 0/1/0
downstream 6 interface qam 0/1/1
downstream 7 interface qam 0/1/2
downstream 8 interface qam 0/1/3
upstream 9 interface upstream 3/0.0/0
upstream 10 interface upstream 3/1.0/0
upstream 11 interface upstream 3/2.0/0
upstream 12 interface upstream 3/3.0/0

bonding-group downstream mac-domain 1 group-id 1
qam 0/0/0
qam 0/0/1
qam 0/0/2
qam 0/0/3
qam 0/1/0
qam 0/1/1
qam 0/1/2
qam 0/1/3
prov-attr-mask 0x80000000
reseq wait-time 180
reseq warn-thrshld 0

when i ran the debugs i found this:

[Tue Aug 25 00:04:48 2020]-DE-MAC-1: CM bcc8.1000.0e38: mac_mgr_rm_cm_free, downstream svf 0x32cff, chan_cnt 1, free resource 0 kbps, rc 0

[Tue Aug 25 00:04:48 2020]-DE-MAC-1: CM bcc8.1000.0e38: mac_mgr_rm_cm_free, upstream svf 0x32c7f, chan_cnt 1, free resource 0 kbps, rc 0

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: recv REG-REQ-MP msg,type 44, len 260

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38 dump message type=44:
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 00 17 10 00 b8 14 bc c8 10 00 0e 38 00 f2 00 00
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 03 04 2c 00 04 71 01 01 03 01 01 04 15 01 01 01
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 02 04 01 31 e8 80 03 04 00 2e 82 40 04 01 00 07
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 01 00 12 01 02 06 10 d2 4f c8 98 6a 3e f6 a5 3e
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 82 60 49 ee f2 69 b9 07 10 cd 4e 00 6d 6b 76 1f
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: f3 db d3 fc 55 8a 2c 27 5b 05 58 01 01 01 02 01
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 03 03 01 01 0a 01 01 0b 01 18 0f 01 01 10 04 00
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 00 00 02 11 01 00 14 01 00 15 01 3f 16 01 01 17
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 01 01 18 01 04 19 01 04 1a 01 04 1b 01 20 1c 01
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 02 1d 01 08 1e 01 20 1f 01 10 20 01 10 21 01 02
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 22 01 01 23 01 00 24 01 00 25 01 01 26 02 00 ff
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 27 01 01 08 03 bc c8 10 0c 04 0a 6e 01 de 30 07
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 01 05 00 10 18 80 61 30 07 01 05 00 10 18 80 62
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 30 07 01 05 00 10 00 00 02 30 07 01 05 00 10 00
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 00 03 30 07 01 05 00 10 00 00 04 30 07 01 05 00
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 10 00 00 05 30 07 01 05 00 10 00 00 08 39 01 10
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 35 a8 82 e9
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38 dump over, now decode message 44

Dest. Address : 0017.1000.b814
Source Address: bcc8.1000.0e38
Message Length: 242 (decimal) DSAP: 00 SSAP: 00
Control: 03 Version: 04
Type: reg-req-mp(44) RSVD: 00

SID: 04 71 Num. of fragments: 01 Fragment Seq Num: 01

Network Access Control Object(3): 01
DOCSIS 1.0 Class of Service(4): ---------- 21 bytes
|Class ID(1): 01
|Maximum Downstream Rate Configuration Setting(2):01 31 e8 80
|Maximum Upstream Rate Configuration Setting(3): 00 2e 82 40
|Upstream Channel Priority Configuration Setting(4):00
|Class-of-Service Privacy Enable(7): 00
Maximum Number of CPEs(18): 02
CM Message Integrity Check(6): (16 bytes)
d2 4f c8 98 6a 3e f6 a5 3e 82 60 49 ee f2 69 b9
CMTS Message Integrity Check (MIC)(7): (16 bytes)
cd 4e 00 6d 6b 76 1f f3 db d3 fc 55 8a 2c 27 5b
Modem Capabilities Encoding(5): ---------- 88 bytes
|Concatenation Support(1): 01
|DOCSIS Version(2): 03
|Fragmentation Support(3): 01
|Transmit Per-Equalizer Taps(10): 01
|Number of Transmit Equalizer Taps(11): 18
|Expanded Unicast SID Space(15): 01
|Ranging Hold-Off Support(16): 00 00 00 02
|L2VPN Capability(17): 00
|Upstream Frequency Range Support(20): 00
|Upstream Symbol Rate Support(21): 3f
|Selectable Active Code Mode 2 Support(22): 01
|Code Hopping Mode 2 Support(23): 01
|Multiple Transmit Channel Support(24): 04
|Msps Upstream Transmit Channel Support(25): 04
|Msps Upstream Transmit Channel Support(26): 04
|Total SID Cluster Support(27): 20
|SID Cluster per Service Flow Support(28): 02
|Multiple Receive Channel Support(29): 08
|Total DSID Support(30): 20
|Resequencing DSID Support(31): 10
|Multicast DSID Support(32): 10
|Multicast DSID Forwarding(33): 02
|Frame Control Type Forwarding Capability(34): 01
|DPV Capability(35): 00
|Unsolicited Grant Service/Upstream Service Flow Support(36):00
|MAP and UCD Receipt Support(37): 01
|Upstream Drop Classifier Support(38): 00 ff
|IPv6 Support(39): 01
Vendor ID Encoding(8): bc c8 10
Modem IP address(12): 0a 6e 01 de
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 18 80 61
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 18 80 62
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 00 00 02
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 00 00 03
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 00 00 04
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 00 00 05
CM Receive Channel Profile Encodings(48): ---------- 7 bytes
|RCP-ID(1): 00 10 00 00 08
CM Initialization Reason(57): 10

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: REG-REQ received
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: mac_cm_reg_req_rm, downstream svf 0x32cff, chan_cnt 1, request resource 0 kbps, rc 0

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: mac_cm_reg_req_rm, upstream svf 0x32c7f, chan_cnt 1, request resource 0 kbps, rc 0

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: reg_req_msg_proc: there are 3 pending rpc request,pending id =194074448

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: send REG-RSP-MP msg to cm,msgtype 45, len 107, ds_num=520

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38 dump message type=45:
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: bc c8 [Tue Aug 25 00:05:26 2020]-DE-MAC-1: 20 01 10 21 01 00 22 01 01 23 01 00 24 01 00 25
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 01 01 26 02 00 00 27 01 01 28 01 d8 01
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38 dump over, now decode message 45

Dest. Address : bcc8.1000.0e38
Source Address: 0017.1000.b814
Message Length: 107 (decimal) DSAP: 00 SSAP: 00
Control: 03 Version: 04
Type: reg-rsp-mp(45) RSVD: 00

SID: 04 71 Response: 00
Num of fragments: 01 Fragment Seq Num: 01

Docsis 1.0 Service Class(1): ---------- 7 bytes
|Class ID(1): 01
|Service ID(2): 04 71
Modem Capabilities Encoding(5): ---------- 85 bytes
|Concatenation Support(1): 01
|DOCSIS Version(2): 03
|Fragmentation Support(3): 01
|Transmit Per-Equalizer Taps(10): 01
|Number of Transmit Equalizer Taps(11): 18
|Expanded Unicast SID Space(15): 01
|Ranging Hold-Off Support(16): 00 00 00 02
|Upstream Frequency Range Support(20): 00
|Upstream Symbol Rate Support(21): 3f
|Selectable Active Code Mode 2 Support(22): 01
|Code Hopping Mode 2 Support(23): 01
|Multiple Transmit Channel Support(24): 00
|Msps Upstream Transmit Channel Support(25): 04
|Msps Upstream Transmit Channel Support(26): 04
|Total SID Cluster Support(27): 20
|SID Cluster per Service Flow Support(28): 02
|Multiple Receive Channel Support(29): 00
|Total DSID Support(30): 20
|Resequencing DSID Support(31): 10
|Multicast DSID Support(32): 10
|Multicast DSID Forwarding(33): 00
|Frame Control Type Forwarding Capability(34): 01
|DPV Capability(35): 00
|Unsolicited Grant Service/Upstream Service Flow Support(36):00
|MAP and UCD Receipt Support(37): 01
|Upstream Drop Classifier Support(38): 00 00
|IPv6 Support(39): 01

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: REG-RSP send, confirmation code 0
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: recv REG-ACK msg,type 14, len 27

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38 dump message type=14:
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 00 17 10 00 b8 14 bc c8 10 00 0e 38 00 09 00 00
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: 03 02 0e 00 04 71 00 50 d0 68 c3
[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38 dump over, now decode message 14

Dest. Address : 0017.1000.b814
Source Address: bcc8.1000.0e38
Message Length: 9 (decimal) DSAP: 00 SSAP: 00
Control: 03 Version: 02
Type: reg-ack(14) RSVD: 00

SID: 04 71 Confirmation Code: 00

TLV wasn't shipped in this MAC message

[Tue Aug 25 00:05:26 2020]-DE-MAC-1: CM bcc8.1000.0e38: REG_ACK received, confirmation code 0

thanks

Log in or register to post comments