docsis 3.0 MC88V | docsis.org

You are here

docsis 3.0 MC88V

5 posts / 0 new
Last post
husamaga
docsis 3.0 MC88V

Hello,
i have a problem with my cmts (7225vxr & MC88V line card) i'm tring to get the modem connected on downstream & upstream but with no success.
it's my first docsis 3.0 cmts.
the config below:
Current configuration : 8058 bytes
!
! Last configuration change at 02:49:20 mezs Tue Apr 11 2000
! NVRAM config last updated at 02:49:45 mezs Tue Apr 11 2000
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
!
!
boot-start-marker
boot-end-marker
!
no logging console
enable password
!
no aaa new-model
clock timezone mezs 1
clock calendar-valid
cable admission-control preempt priority-voice
!
!
!
!
no cable qos permission create
no cable qos permission update
cable qos permission modems
!
no cable logging badipsource
no cable logging layer2events
no cable logging overlapip
cable time-server
cable wideband auto-reset
cable load-balance group 1
!
ip subnet-zero
!
!
ip name-server x.x.x.x
ip name-server x.x.x.x
!
!
ip cef
!
!
multilink bundle-name authenticated
call rsvp-sync
!
!
!
!
!
!
!
!
!
controller Integrated-Cable 1/0
rf-channel 0 cable downstream channel-id 1
rf-channel 0 frequency 378000000 annex A modulation 64qam interleave 12
rf-channel 0 rf-power 46.0
no rf-channel 0 rf-shutdown
rf-channel 1 cable downstream channel-id 2
rf-channel 1 frequency 386000000 annex A modulation 64qam interleave 12
rf-channel 1 rf-power 46.0
no rf-channel 1 rf-shutdown
rf-channel 2 cable downstream channel-id 3
rf-channel 2 frequency 394000000 annex A modulation 64qam interleave 12
rf-channel 2 rf-power 46.0
no rf-channel 2 rf-shutdown
rf-channel 3 cable downstream channel-id 4
rf-channel 3 frequency 402000000 annex A modulation 64qam interleave 12
rf-channel 3 rf-power 46.0
no rf-channel 3 rf-shutdown
!
controller Integrated-Cable 1/1
rf-channel 0 cable downstream channel-id 5
rf-channel 0 frequency 378000000 annex A modulation 256qam interleave 12
rf-channel 0 rf-power 46.0
no rf-channel 0 rf-shutdown
rf-channel 1 cable downstream channel-id 6
rf-channel 1 frequency 386000000 annex A modulation 256qam interleave 12
rf-channel 1 rf-power 46.0
no rf-channel 1 rf-shutdown
rf-channel 2 cable downstream channel-id 7
rf-channel 2 frequency 394000000 annex A modulation 256qam interleave 12
rf-channel 2 rf-power 46.0
no rf-channel 2 rf-shutdown
rf-channel 3 cable downstream channel-id 8
rf-channel 3 frequency 402000000 annex A modulation 256qam interleave 12
rf-channel 3 rf-power 46.0
no rf-channel 3 rf-shutdown
!
!
!
!
!
!
!
interface GigabitEthernet0/1
description Internet-Link
ip address 172.1.1.2 255.255.255.192
no ip redirects
no ip unreachables
no ip proxy-arp
media-type rj45
speed auto
duplex full
no negotiation auto
!
interface FastEthernet0/2
no ip address
shutdown
speed auto
duplex auto
!
interface GigabitEthernet0/2
no ip address
shutdown
media-type rj45
speed auto
duplex auto
negotiation auto
!
interface GigabitEthernet0/3
no ip address
shutdown
media-type rj45
speed auto
duplex auto
negotiation auto
!
interface Cable1/0
downstream Integrated-Cable 1/0 rf-channel 0-3 upstream 0-3
cable mtc-mode
cable rcp-control verbose
cable cm-status enable 3 6 8
cable shared-secret 7 0310541B150A225E4B1D
cable enable-trap cmonoff-notification
cable enable-trap cmonoff-interval 500
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 frequency 52000000
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 ingress-noise-cancellation 400
cable upstream 0 docsis-mode tdma-atdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 121
no cable upstream 0 shutdown
cable upstream 1 connector 1
cable upstream 1 frequency 52000000
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 docsis-mode tdma-atdma
cable upstream 1 minislot-size 2
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 121
no cable upstream 1 shutdown
cable upstream 2 connector 2
cable upstream 2 frequency 52000000
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 docsis-mode tdma-atdma
cable upstream 2 minislot-size 2
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 121
no cable upstream 2 shutdown
cable upstream 3 connector 3
cable upstream 3 frequency 52000000
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 docsis-mode tdma-atdma
cable upstream 3 minislot-size 2
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 121
no cable upstream 3 shutdown
!
interface Wideband-Cable1/0:0
load-interval 30
cable bundle 1
cable bonding-group-id 1
cable dynamic-bw-sharing
cable rf-channel 0 bandwidth-percent 50
cable rf-channel 1 bandwidth-percent 50
cable rf-channel 2 bandwidth-percent 50
cable rf-channel 3 bandwidth-percent 50
!
interface Integrated-Cable1/0:0
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/0:1
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/0:2
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/0:3
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Cable1/1
downstream Integrated-Cable 1/1 rf-channel 0-3 upstream 4-7
cable mtc-mode
cable rcp-control verbose
cable cm-status enable 3 6 8
cable enable-trap cmonoff-notification
cable enable-trap cmonoff-interval 500
no cable packet-cache
cable upstream max-ports 4
cable upstream 0 connector 4
cable upstream 0 frequency 52000000
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma-atdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 121
no cable upstream 0 shutdown
cable upstream 1 connector 5
cable upstream 1 frequency 52000000
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 docsis-mode tdma-atdma
cable upstream 1 minislot-size 2
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 121
no cable upstream 1 shutdown
cable upstream 2 connector 6
cable upstream 2 frequency 52000000
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 docsis-mode tdma-atdma
cable upstream 2 minislot-size 2
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 121
no cable upstream 2 shutdown
cable upstream 3 connector 7
cable upstream 3 frequency 52000000
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 docsis-mode tdma-atdma
cable upstream 3 minislot-size 2
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 121
no cable upstream 3 shutdown
!
interface Wideband-Cable1/1:0
load-interval 30
cable bundle 1
cable bonding-group-id 7
cable dynamic-bw-sharing
cable rf-channel 0 bandwidth-percent 50
cable rf-channel 1 bandwidth-percent 50
cable rf-channel 2 bandwidth-percent 50
cable rf-channel 3 bandwidth-percent 50
!
interface Integrated-Cable1/1:0
shutdown
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/1:1
shutdown
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/1:2
shutdown
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/1:3
shutdown
no cable rf-bandwidth-percent
!
interface Bundle1
ip address 10.1.8.0 255.255.240.0 secondary
ip address 172.1.1.66 255.255.255.192
no ip redirects
no ip unreachables
no ip proxy-arp
cable arp filter request-send 3 2
cable arp filter reply-accept 3 2
cable source-verify dhcp
cable dhcp-giaddr primary
!
ip default-gateway 172.1.1.1
ip classless
ip route 0.0.0.0 0.0.0.0 172.1.1.1
!
no ip http server
no ip http secure-server
!
!
logging cmts cr10k log-level errors
cpd cr-id 1
nls resp-timeout 1
!
!
!
control-plane
!
!
dial-peer cor custom
!
!
!
!
gatekeeper
shutdown

tadeusz.ciesielski
Must change

Must change
interface Integrated-Cable1/0:x
shutdown

to
interface Integrated-Cable1/0:x
no shutdown

kwesibrunee
Integrated Cable is for

Integrated Cable is for narrowband i.e. docsis 1.x and docsis 2.0
Wideband Cable is for docsis 3 modems

To be able to lock docsis 3 modems you will also need to define the fiber-node section which will tell the docsis 3 modems what downstream and upstream ports are connected.

tadeusz.ciesielski
add fiber node & upstream channel bond

yeah. true but there need to be d2.0 to allow modem to log in and then go to wideband.
Second thing right there need to be fiber-node in this example:
cable fiber-node 1
downstream Integrated-Cable 1/0 rf-channel 0-3
upstream Cable 1 connector 0-3

one more thing
need to add upstream bonding group :

cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3

attributes 80000000

husamaga
Thanks for help, i will try

Thanks for help, i will try that.
also i dont need to bond upstreams.

Log in or register to post comments