Hello,
i have a problem with my cmts (7225vxr & MC88V line card) i'm tring to get the modem connected on downstream & upstream but with no success.
it's my first docsis 3.0 cmts.
the config below:
Current configuration : 8058 bytes
!
! Last configuration change at 02:49:20 mezs Tue Apr 11 2000
! NVRAM config last updated at 02:49:45 mezs Tue Apr 11 2000
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
!
!
boot-start-marker
boot-end-marker
!
no logging console
enable password
!
no aaa new-model
clock timezone mezs 1
clock calendar-valid
cable admission-control preempt priority-voice
!
!
!
!
no cable qos permission create
no cable qos permission update
cable qos permission modems
!
no cable logging badipsource
no cable logging layer2events
no cable logging overlapip
cable time-server
cable wideband auto-reset
cable load-balance group 1
!
ip subnet-zero
!
!
ip name-server x.x.x.x
ip name-server x.x.x.x
!
!
ip cef
!
!
multilink bundle-name authenticated
call rsvp-sync
!
!
!
!
!
!
!
!
!
controller Integrated-Cable 1/0
rf-channel 0 cable downstream channel-id 1
rf-channel 0 frequency 378000000 annex A modulation 64qam interleave 12
rf-channel 0 rf-power 46.0
no rf-channel 0 rf-shutdown
rf-channel 1 cable downstream channel-id 2
rf-channel 1 frequency 386000000 annex A modulation 64qam interleave 12
rf-channel 1 rf-power 46.0
no rf-channel 1 rf-shutdown
rf-channel 2 cable downstream channel-id 3
rf-channel 2 frequency 394000000 annex A modulation 64qam interleave 12
rf-channel 2 rf-power 46.0
no rf-channel 2 rf-shutdown
rf-channel 3 cable downstream channel-id 4
rf-channel 3 frequency 402000000 annex A modulation 64qam interleave 12
rf-channel 3 rf-power 46.0
no rf-channel 3 rf-shutdown
!
controller Integrated-Cable 1/1
rf-channel 0 cable downstream channel-id 5
rf-channel 0 frequency 378000000 annex A modulation 256qam interleave 12
rf-channel 0 rf-power 46.0
no rf-channel 0 rf-shutdown
rf-channel 1 cable downstream channel-id 6
rf-channel 1 frequency 386000000 annex A modulation 256qam interleave 12
rf-channel 1 rf-power 46.0
no rf-channel 1 rf-shutdown
rf-channel 2 cable downstream channel-id 7
rf-channel 2 frequency 394000000 annex A modulation 256qam interleave 12
rf-channel 2 rf-power 46.0
no rf-channel 2 rf-shutdown
rf-channel 3 cable downstream channel-id 8
rf-channel 3 frequency 402000000 annex A modulation 256qam interleave 12
rf-channel 3 rf-power 46.0
no rf-channel 3 rf-shutdown
!
!
!
!
!
!
!
interface GigabitEthernet0/1
description Internet-Link
ip address 172.1.1.2 255.255.255.192
no ip redirects
no ip unreachables
no ip proxy-arp
media-type rj45
speed auto
duplex full
no negotiation auto
!
interface FastEthernet0/2
no ip address
shutdown
speed auto
duplex auto
!
interface GigabitEthernet0/2
no ip address
shutdown
media-type rj45
speed auto
duplex auto
negotiation auto
!
interface GigabitEthernet0/3
no ip address
shutdown
media-type rj45
speed auto
duplex auto
negotiation auto
!
interface Cable1/0
downstream Integrated-Cable 1/0 rf-channel 0-3 upstream 0-3
cable mtc-mode
cable rcp-control verbose
cable cm-status enable 3 6 8
cable shared-secret 7 0310541B150A225E4B1D
cable enable-trap cmonoff-notification
cable enable-trap cmonoff-interval 500
no cable packet-cache
cable bundle 1
cable upstream max-ports 4
cable upstream 0 connector 0
cable upstream 0 frequency 52000000
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 ingress-noise-cancellation 400
cable upstream 0 docsis-mode tdma-atdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 121
no cable upstream 0 shutdown
cable upstream 1 connector 1
cable upstream 1 frequency 52000000
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 docsis-mode tdma-atdma
cable upstream 1 minislot-size 2
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 121
no cable upstream 1 shutdown
cable upstream 2 connector 2
cable upstream 2 frequency 52000000
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 docsis-mode tdma-atdma
cable upstream 2 minislot-size 2
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 121
no cable upstream 2 shutdown
cable upstream 3 connector 3
cable upstream 3 frequency 52000000
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 docsis-mode tdma-atdma
cable upstream 3 minislot-size 2
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 121
no cable upstream 3 shutdown
!
interface Wideband-Cable1/0:0
load-interval 30
cable bundle 1
cable bonding-group-id 1
cable dynamic-bw-sharing
cable rf-channel 0 bandwidth-percent 50
cable rf-channel 1 bandwidth-percent 50
cable rf-channel 2 bandwidth-percent 50
cable rf-channel 3 bandwidth-percent 50
!
interface Integrated-Cable1/0:0
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/0:1
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/0:2
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/0:3
shutdown
cable bundle 1
no cable rf-bandwidth-percent
!
interface Cable1/1
downstream Integrated-Cable 1/1 rf-channel 0-3 upstream 4-7
cable mtc-mode
cable rcp-control verbose
cable cm-status enable 3 6 8
cable enable-trap cmonoff-notification
cable enable-trap cmonoff-interval 500
no cable packet-cache
cable upstream max-ports 4
cable upstream 0 connector 4
cable upstream 0 frequency 52000000
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 docsis-mode tdma-atdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 121
no cable upstream 0 shutdown
cable upstream 1 connector 5
cable upstream 1 frequency 52000000
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 docsis-mode tdma-atdma
cable upstream 1 minislot-size 2
cable upstream 1 range-backoff 3 6
cable upstream 1 modulation-profile 121
no cable upstream 1 shutdown
cable upstream 2 connector 6
cable upstream 2 frequency 52000000
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 docsis-mode tdma-atdma
cable upstream 2 minislot-size 2
cable upstream 2 range-backoff 3 6
cable upstream 2 modulation-profile 121
no cable upstream 2 shutdown
cable upstream 3 connector 7
cable upstream 3 frequency 52000000
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 docsis-mode tdma-atdma
cable upstream 3 minislot-size 2
cable upstream 3 range-backoff 3 6
cable upstream 3 modulation-profile 121
no cable upstream 3 shutdown
!
interface Wideband-Cable1/1:0
load-interval 30
cable bundle 1
cable bonding-group-id 7
cable dynamic-bw-sharing
cable rf-channel 0 bandwidth-percent 50
cable rf-channel 1 bandwidth-percent 50
cable rf-channel 2 bandwidth-percent 50
cable rf-channel 3 bandwidth-percent 50
!
interface Integrated-Cable1/1:0
shutdown
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/1:1
shutdown
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/1:2
shutdown
no cable rf-bandwidth-percent
!
interface Integrated-Cable1/1:3
shutdown
no cable rf-bandwidth-percent
!
interface Bundle1
ip address 10.1.8.0 255.255.240.0 secondary
ip address 172.1.1.66 255.255.255.192
no ip redirects
no ip unreachables
no ip proxy-arp
cable arp filter request-send 3 2
cable arp filter reply-accept 3 2
cable source-verify dhcp
cable dhcp-giaddr primary
!
ip default-gateway 172.1.1.1
ip classless
ip route 0.0.0.0 0.0.0.0 172.1.1.1
!
no ip http server
no ip http secure-server
!
!
logging cmts cr10k log-level errors
cpd cr-id 1
nls resp-timeout 1
!
!
!
control-plane
!
!
dial-peer cor custom
!
!
!
!
gatekeeper
shutdown
Must change
interface Integrated-Cable1/0:x
shutdown
to
interface Integrated-Cable1/0:x
no shutdown
Integrated Cable is for narrowband i.e. docsis 1.x and docsis 2.0
Wideband Cable is for docsis 3 modems
To be able to lock docsis 3 modems you will also need to define the fiber-node section which will tell the docsis 3 modems what downstream and upstream ports are connected.
yeah. true but there need to be d2.0 to allow modem to log in and then go to wideband.
Second thing right there need to be fiber-node in this example:
cable fiber-node 1
downstream Integrated-Cable 1/0 rf-channel 0-3
upstream Cable 1 connector 0-3
one more thing
need to add upstream bonding group :
cable upstream bonding-group 1
upstream 0
upstream 1
upstream 2
upstream 3
attributes 80000000
Thanks for help, i will try that.
also i dont need to bond upstreams.