Hello every1,
I am trying to run Broadcast Video over Cisco cBR8 and unfortunately I have stucked on WAN side setup.
My setup is simple: got 2x DVB-C streams (multicasts) that I would like to "see" on RF Video QAMs behind CMTS.
DVB-C source works (mcasts are being sent towards cBR).
"RF side" config is done: VCG, SDG, LED, table (table based) is configured
But I can't see any traffic on video QAMs...
I got this task as our video guy has changed his job but I have never touched video...
Currently I use SW 16.12.10g, but it looks that video did not change much since SW 16.6.x.
Could anyone help and (best) share a full running-config from cBR-8 showing how to configure Broadcast video
(ofc without credentials/keys and other "non public" data)?
Many thanks in advance
I remember seeing a section called "Troubleshooting cBR-8 Converged Video Services"
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSPG-25...
Also maybe have a look in
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSPG-25...
Thx for the answer - I have read those two already.
Anyway, with small steps I am moving forward -> some example config would be very helpfull :)