doscsis 1.1 config files for docsis 2.0 CMs on a docsis 1.1 CMTS | docsis.org

You are here

doscsis 1.1 config files for docsis 2.0 CMs on a docsis 1.1 CMTS

5 posts / 0 new
Last post
emkowale
doscsis 1.1 config files for docsis 2.0 CMs on a docsis 1.1 CMTS

Hello,

I have a Arris CMTS 1500. I noticed that when I hooked it up to replace my Arris CMTS 1000 that 50 of my 85 CMs were stuck in a "Registration Request" state. After much research I determined that the 50 CMs were Ambit CMs that were docsis 2.0. I guess what I need is a CM config file that disables the docsis 2.0 stuff. Can anybody help out? Also, does anybody have a list of what the TLVs are?
I switched CMTSs because the Arris TM502Gs (combination CM and MTA for VoIP) do not support docsis 1.0. The CMTS 1500 is 1.1. I have an Arris support contract and will contribute help to anybody the needs it. The problem is that the support contract does not include CMTSs. I do have the documentation for the CMTS 1500 if any one needs it. BTW, does anyone have the latest firmware for the CMTS 1500? I have 3.99.51, but I this the newest is 4.3.

Thanks,
Eric

Rui Ribeiro (not verified)
re: doscsis 1.1 config files for docsis 2.0 CMs on a docsis 1.1

Hi Eric,

Try using DocsisTwoEnable 0; in your CM files.

Rui

emkowale
Hmmm

Rui,

I thought I tried that and it didn't work. Isn't that line for disabling the DOCSIS 2.0 features on a DOCSIS 2.0 CMTS? I'm not sure that DOCSIS 1.1 knows about that line.

Eric

cmcaldas
modem file

email me the modem file and I can check/turn off the docsis 2.0. please include the docsis share secret, if your using one

cmcaldas@gmail.com

Santhoff
Did you eve figure out your problem?

I'm having the same problem with my 1500. Did you ever figure out the problem and what was it?
Any information you could supply would be appreciated.
Thanks

Log in or register to post comments