Hi there,
Is there a way to know who is using too heavy the downstream channel in BSR64k ? Because 2.0 Cable modems with +30MB of speed will saturate the channels in a short time.
sounds like you may have theft of service issues. would recommend adding command to enforce bpi+ only, dhcp lease query and host auth.
as for who's taking too much data, like a 2.0 modem with over 30Mb, run show cable modem max . it would show the modem's qos in both directions. if one stands out of the norm, deny the modem
sounds like you may have theft of service issues. would recommend adding command to enforce bpi+ only, dhcp lease query and host auth.
as for who's taking too much data, like a 2.0 modem with over 30Mb, run show cable modem max . it would show the modem's qos in both directions. if one stands out of the norm, deny the modem
BSR:7A#sh cab modem max
Intf Prim Prim Modem Primary Upstream Primary Downstream
Cable DS US Mac Address US SFID Max-Rate DS SFID Max-Rate
2/0 10D0C0 U2C0L0 000b.0699.3eec 58966 9227469 33982 28835840
2/0 10D0C2 U0C0L0 000b.0699.3f1a 7663 9227469 33417 28835840
2/0 10D0C1 U0C3L0 000b.06a5.c2a0 34406 9227469 50343 28835840
2/0 10D0C0 U1C3L0 000b.06c7.02a6 14639 9227469 54783 28835840
2/0 10D0C2 U0C2L0 000b.06c8.ef42 16802 1730150 38357 3460300
2/0 10D0C2 U1C3L0 000b.06c8.efe2 34606 9227469 32007 28835840