we are inserting one MC88v card on slot 5 , after that we are getting below log continuous.
already we are running on two MC88v on same chassis with no error.
IOS : ubr7200p-jk9su2-mz.122-33.SCF5.bin
Plz any one help me out to resolve these issue.
Jan 4 11:19:01.306: %MCU-5-RESET: MCU port adapter in slot 5 was reset
Jan 4 11:19:01.974: %MCU-6-HWREV: Slot 5: HW revision is 0
Jan 4 11:19:02.478: %MCUFSM-1-CARD_LOADING: Card in slot (5) booting: Bundled, size 25194032 bytes, version 513E73D6, checksum 3671C671
Jan 4 11:19:04.498: %QOS-4-FO_IN_USE: Releasing feature object with reference count 20
Jan 4 11:19:33.682: %IPCOIR-3-LCCRASH: The card in slot 5/0 has crashed. Cause Register: 0x1500, Signal: 23
Jan 4 11:19:36.794: wbchannel_delete_context Integrated-Cable
Jan 4 11:19:36.862: wbchannel_delete_context Integrated-Cable
Jan 4 11:19:36.970: %QOS-4-FO_IN_USE: Releasing feature object with reference count 3
SLOT 3: Jan 4 11:19:35.459: %LICENSE-6-VIOLATION: Feature DS_License 1.0 count violation - count = 8, usage count = 8.
Jan 4 11:19:38.794: %LINK-3-UPDOWN: Interface Wideband CMTS, changed state to down
Jan 4 11:19:38.862: %LINK-3-UPDOWN: Interface Wideband CMTS, changed state to down
Jan 4 11:19:41.722: %UBR7200-5-UPDOWN: Interface Cable5/0 U0, changed state to down
Jan 4 11:19:41.738: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/0:0, changed state to down
Jan 4 11:19:41.742: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/0:1, changed state to down
Jan 4 11:19:41.742: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/0:2, changed state to down
Jan 4 11:19:41.742: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/0:3, changed state to down
Jan 4 11:19:41.742: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/0:4, changed state to down
Jan 4 11:19:41.746: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/0:5, changed state to down
Jan 4 11:19:41.746: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/0:0, changed state to down
Jan 4 11:19:41.746: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/0:1, changed state to down
Jan 4 11:19:41.750: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/0:2, changed state to down
Jan 4 11:19:41.750: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/0:3, changed state to down
Jan 4 11:19:41.750: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/1:0, changed state to down
Jan 4 11:19:41.754: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/1:1, changed state to down
Jan 4 11:19:41.754: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/1:2, changed state to down
Jan 4 11:19:41.754: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/1:3, changed state to down
Jan 4 11:19:41.758: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/1:4, changed state to down
Jan 4 11:19:41.758: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wideband-Cable5/1:5, changed state to down
Jan 4 11:19:41.758: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/1:0, changed state to down
Jan 4 11:19:41.762: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/1:1, changed state to down
Jan 4 11:19:41.762: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/1:2, changed state to down
Jan 4 11:19:41.762: %LINEPROTO-5-UPDOWN: Line protocol on Interface Integrated-Cable5/1:3, changed state to down
Jan 4 11:19:41.806: %UBR7200-5-UPDOWN: Interface Cable5/0 U1, changed state to down
Jan 4 11:19:41.806: %SNMP-5-LINK_DOWN: LinkDown:Interface Cable5/0-upstream1 changed state to down
Jan 4 11:19:41.814: %UBR7200-5-UPDOWN: Interface Cable5/0 U2, changed state to down
Jan 4 11:19:41.818: %SNMP-5-LINK_DOWN: LinkDown:Interface Cable5/0-upstream2 changed state to down
Jan 4 11:19:41.822: %UBR7200-5-UPDOWN: Interface Cable5/0 U3, changed state to down
Jan 4 11:19:41.826: %SNMP-5-LINK_DOWN: LinkDown:Interface Cable5/0-upstream3 changed state to down
Jan 4 11:19:41.906: %UBR7200-5-UPDOWN: Interface Cable5/1 U0, changed state to down
Jan 4 11:19:41.918: %UBR7200-5-UPDOWN: Interface Cable5/1 U1, changed state to down
Jan 4 11:19:41.930: %UBR7200-5-UPDOWN: Interface Cable5/1 U2, changed state to down
Jan 4 11:19:42.010: %UBR7200-5-UPDOWN: Interface Cable5/1 U3, changed state to down
Jan 4 11:19:42.010: %SNMP-5-LINK_DOWN: LinkDown:Interface Cable5/1-upstream3 changed state to down
Jan 4 11:19:42.074: %MCU-5-RESET: MCU port adapter in slot 5 was reset
Jan 4 11:19:42.670: %MCU-6-HWREV: Slot 5: HW revision is 0
Jan 4 11:19:43.174: %MCUFSM-1-CARD_LOADING: Card in slot (5) booting: Bundled, size 25194032 bytes, version 513E73D6, checksum 3671C671
Jan 4 11:20:08.679: %QOS-4-FO_IN_USE: Releasing feature object with reference count 1
Jan 4 11:20:14.467: %IPCOIR-3-LCCRASH: The card in slot 5/0 has crashed. Cause Register: 0x1500, Signal: 23
Jan 4 11:20:17.571: wbchannel_delete_context Integrated-Cable
Jan 4 11:20:17.623: wbchannel_delete_context Integrated-Cable
Jan 4 11:20:19.571: %LINK-3-UPDOWN: Interface Wideband CMTS, changed state to down
Jan 4 11:20:19.623: %LINK-3-UPDOWN: Interface Wideband CMTS, changed state to down
This may help:
http://www.cisco.com/c/en/us/td/docs/cable/cmts/ubr10012/troubleshooting...
So it sounds like you already have the latest IOS.
Can you try the card in another slot, even if you swap it with one of the working cards.
This will it least narrow down whether the card is faulty or the slot is faulty.
On the ubr10k you can login to the linecard and look at logs etc. Not sure if this is possible on the 7200 series?
On ubr10k you go "service internal" and then "telnet 127.0.0.51" if you wanted to login to card 5/1
Once logged in you can "show log" etc
You can also use the "attach" command. I believe it works on both 7200 and 10k platforms.
Type "attach 5" from enable mode. That will put you on the "console" of slot 5.
cmts#attach 5
Entering CONSOLE for slot 5/0
Type "^C^C^C" to end this session
clc_5_0>