| Attachment | Size |
|---|---|
 CM status 1 | 135.26 KB |
| CM status 2 | 129.68 KB |
| network topology | 90.8 KB |
Hello,
Our Cable Modem and CPE have ip and it has ONLINE status in 'show cable modem' command in C3.
But it doesn't have any internet connection.
Here is the configuration file of CM:
**************************************
Network Access Control:on
Maximum Number of CPEs:1
Privacy Enable:off
Upstream Service Flow Encodings
Service Flow Reference:1
Quality of Service Parameter Set:provisioned admitted active
Traffic Priority:1
Upstream Maximum Sustained Traffic Rate:256000
Maximum Traffic Burst:1522
Minimum Reserved Traffic Rate:32000
Assumed Minimum Reserved Rate Packet Size:64
Timeout for Active QoS Parameters:0
Timeout for Admitted QoS Parameters:0
Maximum Concatenated Burst:1522
Service Flow Scheduling Type:Best Effort
Request/Transmission Policy:0000008A
IP Type of Service Overwrite:and-mask 0xFC or-mask 0x00
Downstream Service Flow Encodings
Service Flow Reference:101
Quality of Service Parameter Set:provisioned admitted active
Traffic Priority:1
Downstream Maximum Sustained Traffic Rate:256000
Maximum Traffic Burst:1522
Minimum Reserved Traffic Rate:32000
Assumed Minimum Reserved Rate Packet Size:64
Timeout for Active QoS Parameters:0
Timeout for Admitted QoS Parameters:0
Maximum Downstream Latency:0
**************************************
I will attach our network topology and some other files.
Those signal levels are entirely too hot to operate correctly.
You need to add about 40dB of attenuation.
Thank you for the reply sir, we currently testing the cable modem if it will have a internet connection, and we are doing it directly without any nodes or anything.
But we still don't know the problem why it doesn't have any internet connection, hope you can help us in our problem.