Hi all
I am new on cmts, but I like to know how I can do
I have a uBR7246 - MC28U,
And I like to know what I need and configuration examenple to do downstream balance for the 8 upstream
I like to use ford all upstream the same freec 35Mhz, the Upstream separate and the 2 channel dowsntream on D0-627Mhz / D1-633Mhz
and all CM come equal register en the downstream channels, method by CM register .
I will be happy for your help.
Thanks and sorry for my bad English
As far I know, load Balance it's a Docsis 3 feature. The MC28U doesn't support Docsis 3, so you can't configure.
What IOS do you have, 12.3BC or 12.2SC ?
Regardless, you should be able to configure the downstream load balance using some commands like this :
cable load-balance group 1 method modems
cable load-balance group 1 threshold load 10 enforce 20
interface cable 5/0
cable load-balance group 1
interface cable 5/1
cable load-balance group 1
Done, It run perfect
here a screenshot about the final balance with the Mc28U
kwow I need help with a new iOS
let me know who can help me with it: ubr7200-ik8su2-mz.123-23.BC.bin I need it to do IP NAT
I hope your help.
Thanks
Hi,
waht comand do you type for that information to your file attachments
Probably "show cable load-balance load"