We have a BSR2000 that is no longer booting:
Start application from FLASH:
Booting image appImage_100P4904TRCU.bin
ataFileGet: read error!
doAppImageValidate: can not get flash (ata) appImage appImage_100P4904TRCU.bin!
cmtsDecompExtApp: doAppImageValidate failed for file appImage_100P4904TRCU.bin
No valid application image on compact flash
I have the bin file on a TFTP server, and would like to recopy it to the BSR2000. How would I set up the boot parameters to do this?
In addition, where can one obtain manuals for the BSR2000? Was unable to find them on the Motorola site...
remove the flash card, put into a pc and copy it over that way...
as for other information, post your email
~Carl
[Removed email]
Got it working. Will provide details later. Question though: should the app .bin file be on nvram or flash? And where should it be booting from?
In general, nvram would hold the boot or image for the unit. you'll see a few other things like the startup config.
Flash would be your backup of startup config, image and so on. can also boot from flash (recommend from nvram). here would also be the log file and copy of bootrom. not needed once it's been upgraded.
Carl - We're in the same boat, can I please ask you to sned me ( lnorman@cablesight.com ) a copy of the latest BootRom for a BSR2000? You appear to be a knowledgable guy here.
I used the c command to configure the boot parameters, then the H command to load the image into flash. You need to customize to suit your network: hostname is the tftp server, b.b.b.b is the IP for the BSR2000 (set your mask appropriately... our config needed a class C mask of 255.255.255.0, thus ffffff00) , h.h.h.h is the IP of the tftp server, g.g.g.g is the IP of the gateway, hostuserid/hostpassword for the tftp server (although I'm not sure if this is required). Our targetname is swbsr2xxx, but not sure that is required either. After the H command completed, it tells you to use the D command to decompress and execute it. Worked like a charm.
[VxWorks Boot]: H
boot device : marfec
unit number : 1
processor number : 0
host name : hostname
file name : /appImage_100P4904TRCU.bin
inet on ethernet (e) : b.b.b.b:ffffff00
host inet (h) : h.h.h.h
gateway inet (g) : g.g.g.g
user (u) : hostuserid
ftp password (pw) : hostpassword
flags (f) : 0x80
target name (tn) : swbsr2xxx
Attached TCP/IP interface to marfec1.
Loading Application Image...
netLoadAppImage: read 0x0041b17a bytes
netLoadAppImage: application image checksum = 0xde9e6ae1
netLoadAppImage: successful!
New appImage loaded. Change boot dev to FLASH: and type D to run it.
Hi
I need de boot image from BSR200, please helpme my email is caginge@hotmail.com
Hi,
I need new bootrom for BSR 2000, too. Please anybody send it to mtrunky@emtest.sk.
Currently I have bootloader 1.0.29.
Thank you
Hi
I too need this file, can you send me on e-mail agnaldo@tecnocabo.com.br
tks
Hi, I need the file, can you send me pls, my email is hruiz@multireg.com.ar
Saludos.
When my CMTS has initialized, It's displays this:
BSR 2000 Power-On Diagnostics...
Board
Assembly PN = 520699-006-00
SN = G106651020600045
REV = T
Upper Level
Assembly PN = 520025-006-00
SN = G106651011200039
REV = P
BootROM Ver: 1.0.33 Created: Fri Apr 23 10:41:11 EDT 2010
1. CPU Section ...Passed
2. Memory Section ...Passed
3. I2C Section ...Passed
4. Network Section ...Passed
5. RF MAC Section ...Passed
6. RF Tx Section ...Passed
7. RF Rx Section ...Passed
BSR 2000 Passed All Power-On Diagnostics...
Checking Sector 115 for proper TFFS format header
mountFTL bad format: iPage 0 vol.pageTable: ffffffff
flMount: iTL = 0, status = 0x17
usrTffsConfig: tffsDevCreate failed.
tffsInit: usrTffsLnConfig failed
Compact Flash Driver not initialized... skipping format
I guess that I'm missing a bootimage ?. Could you help me?. I can upload an appImage.bin
for the most part it's used for log files. looks like you didn't post all of the output.
please post
~Carl
ATM: i have a problem to BSR2k Checksum error.
boot device : NVRAM
unit number : 0
processor number : 0
host name : MOT
file name : appImage_100P59TRCU.bin
inet on ethernet (e) : 172.21.22.201:ffff0000
host inet (h) : 172.21.1.1
gateway inet (g) : 172.21.1.1
user (u) : reliance
ftp password (pw) : motorola
flags (f) : 0x0
Start application from NVRAM:
Booting image appImage_100P59TRCU.bin
isValidAppImage: Ram file checksum disagrees with original checksum!
Original xsum = 0xaed58d86, New xsum = 0xaed58585
doAppImageValidate: invalid application image
cmtsDecompExtApp: doAppImageValidate failed for file appImage_100P59TRCU.bi
No valid application image in nvram
Load image to Compact Flash failed! (image = 0xffffffff)
what is the problem?
good day somebody knows this error ?by hyperterminal get Volume flash already formated and stay in vxworks boot:....... or where I get bin, thak
post output from the prompt,. type p
that will print to show what what it will boot from, it's ip address and flags
Carl
Simply turn the unit off. remove the flash card, with a pc, copy the image onto the flash card and plug it back into the BSR.
set it to boot from flash with the new image