i need to BSR1000 from EuroDocsis to Docsis | docsis.org

You are here

i need to BSR1000 from EuroDocsis to Docsis

19 posts / 0 new
Last post
amorina
i need to BSR1000 from EuroDocsis to Docsis

i need to change motorola BSR1000 from EuroDocsis to Docsis

i need the command

thanks

grosche
Docsis

enable
configure
cable cmts type domestic

amorina
not work

not work

Escape character is '^]'.

User Access Verification
Password:

bsr1000>en
Password:
bsr1000#config
bsr1000#configure
bsr1000(config)#ca
bsr1000(config)#cable cmts tu
bsr1000(config)#cable cmts ty
bsr1000(config)#cable cmts typ
bsr1000(config)#cable cmts type do
bsr1000(config)#cable cmts type domestic
^
% Invalid input detected at '^' marker.

bsr1000(config)#

grosche
try this

enable
configure
interface cable 0/0
cable downstream 0 annex b

amorina
Escape character is '^]'.

Escape character is '^]'.

User Access Verification
Password:

bsr1000>en
Password:
bsr1000#config
bsr1000#configure
bsr1000(config)#inter
bsr1000(config)#interface ca
bsr1000(config)#interface cable 0/0
bsr1000(config-if)#cable downstream 0 annex b
^
% Invalid input detected at '^' marker.

bsr1000(config-if)#

not work and this command i have test it

grosche
print output

show cable downstream 0

amorina
bsr1000#show cable downstream

bsr1000#show cable downstream 0
^
% Invalid input detected at '^' marker.

bsr1000#show cable downstream 0/0
^
% Invalid input detected at '^' marker.

bsr1000#show cable downstream
^
% Invalid input detected at '^' marker.

bsr1000#show cable downstream
^
% Invalid input detected at '^' marker.

bsr1000#show cable ?
flap-list Flap list
host CPE (host)
modem Modem
modulation-profile Modulation profile
privacy Show BPI parameter configuration
qos QOS information
resource-manager Resource Manager statistics
service-class Service class configuration
spectrum-group Spectrum group
srvclass-stats Service class statistics
bsr1000#show ca
bsr1000#show cable dow
bsr1000#show cable down
bsr1000#show cable downs
bsr1000#show cable downs
^
% Invalid input detected at '^' marker.

bsr1000#

grosche
enable

enable
configure
interface cable 0/0
show cable downstream 0

amorina
bsr1000#show interfaces cable

bsr1000#show interfaces cable 0/0
Cable 0/0 is up, line protocol is up
Hardware is Cable, Mac address is 00:30:b8:80:ef:ae
Internet address is 10.10.255.254/16
snmpIndex=2
MTU 1500 bytes
Last clearing of "show interface" counters 02:03:29
117 packets input, 65988 bytes
Received 117 broadcasts+multicasts
0 input errors,
0 packets output, 0 bytes
0 output errors
Length of output packet queue 0
downstream port 0, snmpIndex=3
upstream port 0, snmpIndex=4
upstream port 1, snmpIndex=5
upstream port 2, snmpIndex=6
upstream port 3, snmpIndex=7
bsr1000#

grosche
enable

enable
configure
interface cable 0/0
show cable downstream 0

grosche
http://de.scribd.com/doc
amorina
bsr1000>en

bsr1000>en
Password:
bsr1000#conf
bsr1000#configure
bsr1000(config)#inter
bsr1000(config)#interface ca
bsr1000(config)#interface cable 0/0
bsr1000(config-if)#show
bsr1000(config-if)#show ca
bsr1000(config-if)#show cable dow
bsr1000(config-if)#show cable downstream 0
ifIndex: 3
description:
annex: A
frequency: 447000000
rfModulation: true
interleaveDepth: 12
qamMode: 256
channelWidth: 8000000
powerLevel: 540
Spectrum Group:
bsr1000(config-if)#

amorina
grosche i have check

grosche i have check

en
configure
cable downstream 0 annex b
dont work

amorina
bsr1000>en

bsr1000>en
Password:
bsr1000#cable downstream 0 annex b
^
% Invalid input detected at '^' marker.

bsr1000#
bsr1000#confgi
bsr1000#config
bsr1000#configure
bsr1000(config)#cable downstream 0 annex b
^
% Invalid input detected at '^' marker.

bsr1000(config)#
bsr1000(config)#inter
bsr1000(config)#interface ca
bsr1000(config)#interface cable 0/0
bsr1000(config-if)#cable downstream 0 annex b
^
% Invalid input detected at '^' marker.

bsr1000(config-if)#

grosche
print output

enable
show version

amorina
bsr1000#show version

bsr1000#show version

BSR 1000R(tm) version 2.0.1.09.PRRU
Copyright (c) 2002 by Motorola.
Compiled Fri May 5 16:33:52 EDT 2006
MPC750 processor with 128MB memory.

Boot ROM : 00.03.01.TA
CPU : MPC750
Memory Size : 128 MB
Board Program ID : RD
Format Version : 9
Assembly Type : 15
PCA Number : PCA-0056-03
Board Revision : B
Board Serial Number : 050077540
Product Serial Number : 050078117
CPLD Revisions : 0x2A/0x14
Fabric FPGA Revision : 0x43
Hardware Acceleration : ON

System Up Time: 2 hours 37 minutes 8 seconds
bsr1000#

grosche
I have no idea.

I have no idea.
Maybe you need a newer firmware or this BSR1000 work only in eurodocsis mode.
I only have the BSR2000.

cmcaldas
Doesn't work

The BSR1k is domestic or euro via hardware. it's docsis 1.1. you need to change downstream modulator for one thing. not worth the trouble. the 2000 supports docsis 2.0 and can be configured to support domestic, euro and J docsis. why some replies mentioned config changes

~Carl

fb445421
BSR 1000 DOCSIS

Hi!

Some people mentioned to me that early BSR 1000 units (with the Riverdelta brand, before Moto bought them) were actually possible to configure for DOCSIS or EuroDOCSIS, but none of the 10+ units I have laid hands on have had that feature. It's odd that it is mentioned in the management guide, though.

The BSR 2000 is definitely configurable as mentioned earlier, but your BSR 1000 is most likely not.

/Fredrik

Log in or register to post comments