In general, you would create a loopback, example loopback 1. in there you would add cable bundle 1 master. there you would add your modem network, cpe and mta network, cable helper addresses (dhcp server's) and no shut
on the cmts card's you will add cable bundle 1.
In general, you would create a loopback, example loopback 1. in there you would add cable bundle 1 master. there you would add your modem network, cpe and mta network, cable helper addresses (dhcp server's) and no shut
on the cmts card's you will add cable bundle 1.
per docsis spec, you need an external dhcp server
~Carl
if i no using external DHCP server, i want create dhcp in CMTS, can you help me ?
Can't be done
Thank a lot.
I will find solution.
Just what your trying to do can't be done. you need an external dhcp/tftp server, per docsis spec.
if you need help, please let me know
~Carl
Can you send me nickname of messenger online, I will contact for you
Post your email and we can go from there
I use email it.ptanh@hotmail.com, can you post or send for me a manual, example, if I want setup a external DHCP Server.
What release are you running?