Hi there,
I've got a project where the customer wants to realise a multi ISP environment where
every ISP has its own provisioning-system.
DHCP1__________DHCP2
______\_________/
_______CMTS
_____/_______\
____/_________\
CM1 ___________ CM2
CPE1 ___________ CPE2
The CMTS is a Motorola BSR2000. The documentation of this device points me to a configuration
server but this is a complete "blackbox" to me.
My first guess was the dhcp relay to direct the dhcp-requsts by mac-address but this seems not
to be possible with the isc dhcp relay. The second guess was a vlan-routing but this applies only
to the cpe/mta-addresses.
Could someone give me a hint on this?
best regards
Benedikt
Use different/separate for each customer/ DS/US interfaces and set different dhcp-helpers per interface
Hi hinzoo,
thank you for your reply. As mentioned we are using a bsr2000 where only 1 DS-Port is available.
regards
Benedikt
that unit has 4 10/100 and 2 gigE ports. you can configure each port for the isp's or configure policy base routing.
do you have the docs?
~Carl
The term controlled environment agriculture (CEA) encompasses a variety of systems that take a technology-based approach to farming. CEA can range from simple shade structures and hoop houses through greenhouses to full indoor or vertical farms. The most advanced systems are fully automated, closed loop systems with software for controlled environment agriculture, water and ventilation. CEA also encompasses common practices such as plastic film over field-grown crops, nets or shade structures and aquaponics systems that integrate fish or aquaculture with plant production.