BSR6400 CMTS unbond CM | docsis.org

You are here

BSR6400 CMTS unbond CM

3 posts / 0 new
Last post
quemalr
BSR6400 CMTS unbond CM

Hi Folks,

Due to complications I can't go into I need a CMTS and CM config which will restrict the CM to 1 downstream channel. I've attempted this in the past following the CMTS documentation and I had no success.

The CMTS SW I am running is:

Slot12 HSIM 2-port GIGE/8-port 10/100 Ethernet (GE2/ETH8) Versions:
Boot ROM: RDN ROM Version: 7.0.0.43 Creation Date: Fri Jul 26 11:03:59 EDT 2013
Image: 6.4.2.2

Appreciate any tips.

Q.

wittmann
Try Forbidden-Attribute-Mask

Hello,

maybe this post will help you: https://docsis.org/comment/4532#comment-4532

Make sure that the Forbidden Attribute Mask 0x80000000 is used for all Service Flows. This tells the CMTS during the registration that no Service Flow is allowed to be bonded.

quemalr
Thanks for the tip.

Thanks for the tip. I remember trying this before and even though the user had service we couldn't poll the CMs using snmp. I'll revisit it.