BSR6400 CMTS unbond CM |

You are here

BSR6400 CMTS unbond CM

3 posts / 0 new
Last post
BSR6400 CMTS unbond CM

Hi Folks,

Due to complications I can't go into I need a CMTS and CM config which will restrict the CM to 1 downstream channel. I've attempted this in the past following the CMTS documentation and I had no success.

The CMTS SW I am running is:

Slot12 HSIM 2-port GIGE/8-port 10/100 Ethernet (GE2/ETH8) Versions:
Boot ROM: RDN ROM Version: Creation Date: Fri Jul 26 11:03:59 EDT 2013

Appreciate any tips.


Try Forbidden-Attribute-Mask


maybe this post will help you:

Make sure that the Forbidden Attribute Mask 0x80000000 is used for all Service Flows. This tells the CMTS during the registration that no Service Flow is allowed to be bonded.

Thanks for the tip.

Thanks for the tip. I remember trying this before and even though the user had service we couldn't poll the CMs using snmp. I'll revisit it.

Log in or register to post comments