bsr64000 upgrade - 6.4.2.2 | docsis.org

You are here

bsr64000 upgrade - 6.4.2.2

7 posts / 0 new
Last post
eniac
bsr64000 upgrade - 6.4.2.2

Hello,

We are working on upgrade of the bsr64000 to release 6.4.2.2 .
We have etherflex module with 1 giga port, with the following version:

Slot15 HSIM 1-port GIGE Multimode (GIGE) Versions:
Boot ROM: RDN ROM Version: 5.0.0.45 Creation Date: Mon Mar 29 14:45:33 EDT 2010
Image: 5.2.1P37.H41.KRBU
Date Built: Mon Mar 29 15:59:30 EDT 2010
CPU: RDN Inc. HSIM8260 -- MPC8260 PowerQUICC II HSIM
Memory Size: 64 MB
Format Version: 9
Assembly Type : 6
Part Number : PCA-0087-03
HW Revision : E
Serial Number : 050*******
Product Number: BSR 64000
FPFE FPGA Version: 301C
BufMgr FPGA Version: 300A
BufMgr Chip Version: F9

Does this module compatible with software release 6.4.2.2 ?

Thank you in advance.

Regards, Eniac

cmcaldas
per release notes

Network Interface Modules (NIMs) (i.e., HSIMs)
NIM PCA Number ARRIS Part (PDM)Number Minimum Required Boot ROM
EtherFlex (10/100/1000) n/a 523447-006-00 Rev: A 6.0.0.44
EtherFlex I/O n/a 523450-003-00 Rev: A n/a
1 The 8-Port 10/100 Ethernet, 1-Port SM Gig-E LX, and 1-Port SX Gig-E modules are not compatible with an RX48 module in a BSR 64000

eniac
Thank You. But I want to use

Thank You. But I want to use it without RX48, only with 2:8 and TX32 cards.
What are you think about it?

Regards

cmcaldas
will work

will still work, the single gigE card is no longer supported. the dual gigE with 10/100 ports is fine. you'll need srm4 instead of srm3 as well. 2x8's and tx32 will work as well

cmcaldas
tx32 possible issue

your tx32 may become an issue due to the timing module. you didn't post that version, but it should look something like this

Slot09 DTX TX32 Domestic, 8 Downstream Ports with 4 Channels per Port Versions:
Boot ROM: 7.0.0.44
Mini ROM: TX32 Mini ROM Ver. 1.19
Image: 6.4.2.3
Patches:
patch_cq88784_6423.txt
patch_cq88824_6423.txt
Date Built: Wed Jun 24 18:23:50 GMT 2015
Hitless Group Number H49
CPU: MPC8548E rev2.1 e500v2 rev2.2
Memory Size: 1024 MB
Format Version : 11
Assembly Type : 45
PDM Number : 555461-001-00
HW Revision : AF
Serial Number : D126652090900067
Switch FPGA Version: 0x00005060
Interface FPGA Version: 0xFE020020
CPLD Version: 0xAD0E
Motherboard Revision Info:
MB Part Number : 535256-005-00
MB HW Revision : T
MB Serial Number : D126652041xxxxxxxxx
QRM Revision Info:
Serial Number : 049108120447xxxxxxxx
Revision Number : 01038705010481032009
Product ID : 0103
Appl Fw : 8705
BootLoader Fw : 0104
HW Revision : 2009
FPGA Ver : 8103
MAC32 Revision Info:
PDM Number : 536352-004-00
HW Revision : D
Serial Number : C1266520523xxxxx
FPGA ID : 5A
FPGA Ver : 28
Timing Module Revision Info:
FPGA Ver : 02020010 <<<<<<<<<<<<<<<<<<<<<
PIC Prot Code Rev: 0100
PIC Main Code Rev: 0102

eniac
TX32

Hi,

Here is the version of the TX32:

Slot12 DTX TX32 Euro, 8 Downstream Ports with 4 Channels per Port Versions:
Boot ROM: 7.0.0.43
Mini ROM: TX32 Mini ROM Ver. 1.17
Image: 5.2.1P37.H41.KRBU
Date Built: Mon Mar 29 15:45:29 EDT 2010
CPU: MPC8548E rev2.1 e500v2 rev2.2
Memory Size: 1024 MB
Format Version : 11
Assembly Type : 45
PDM Number : 555461-001-00
HW Revision : W
Serial Number : H106652092000063
Switch FPGA Version: 0x0000303A
Interface FPGA Version: 0xFE020020
CPLD Version: 0xAD0E
Motherboard Revision Info:
MB Part Number : 535256-005-00
MB HW Revision : M
MB Serial Number : F106652042800164
QRM Revision Info:
Serial Number : 036008xxxxxxxxxxxxxxx
Revision Number : 010386290104F0202007
Product ID : 0103
Appl Fw : 8629
BootLoader Fw : 0104
HW Revision : 2007
FPGA Ver : F020
MAC32 Revision Info:
PDM Number : 536352-004-00
HW Revision : C
Serial Number : F106652052100024
FPGA ID : 5A
FPGA Ver : 28
Timing Module Revision Info:
FPGA Ver : 02020010
PIC Prot Code Rev: 0100
PIC Main Code Rev: 0102

cmcaldas
tx32

that version is fine, do not downgrade the bootroms. rule number one, upgrade to newer is ok, but to downgrade it may cause issues when they get upgraded down the road.

Log in or register to post comments