Hi all! Thanks all future help :)
I am trying to configure a 16 Channel bonding group using a MC20x20 & a Arris TG1672. I can build a bonding group for 4 Channels and 8 Channels and the modem locks no problem. Any more than 8 channels and the modem defaults to 1 channel. I have check that all 16 downstream channels are at the modem. Do I need to create a RCC-Template or is there something I'm missing? I will post my config when I get back to the office. Thanks
I don't know if this is related, but:
http://www.docsis.org/node/2155
http://www.docsis.org/node/1890
http://www.docsis.org/node/863
I'm unfamiliar with the hw restrictions of the MC20x20.
Above links are good, however also note :
* For 16x4 bonding you need IOS 12.2(33)SCH1 or newer
* For 24x8 bonding you need IOS 12.2(33)SCH2 or newer
And some other design ideas :
* http://www.docsis.org/node/2355
Thanks! After reading around some more I found out that we need to upgrade the IOS as well as our PRE. Thanks for the info :)
Must use a PRE-4 for 16x4 bonding