Hello,
I'm trying to setup a C4C for L2VPN but still doesn't works.
I've tried with various config file examples found on this forum without success.
Note that we use Arris Euro Docsis 3 Modem model CM820S with software version 7.5.55
CMTS software version is CMTS_V08.01.00.83
It's looks that my problem is not related to L2VPN but to BPI as when I add PrivacyEnable to a working CM config file without L2VPN the modem stuck
in "dhcpV4done" state and "Privacy=Initializing"
Do I need to configure something on the headend ? We currently don't use shared-secrect may this is the problem ...
Any clue to solve this issue ?
Best regards
tbu-C4c-1# show cable modem xxxx.xxxx.xxxx detail
15/14-10/11 CM xxxx.xxxx.xxxx (e8.3e.fc) D1.0 State=DhcpV4Done D1.0/atdma PrimSID=6693
Cable-Mac= 4, mCMsg = 1 mDSsg = 1 mUSsg = 1, RCS=0x00000003 TCS=0x0000000c
Timing Offset=770 Rec Power= 9.00 dBmV Proto-Throttle=Normal
Uptime= 0 days 0:00:55 IPv4=10.12.177.223 cfg=vpn2.cfg
LB Policy=0 LB Group=0 Filter-Group CM-Down:0 CM-Up:0
Privacy=Initializing
MDF Capability= N/A MDF Mode= N/A
u/d SFID SID State Sched Tmin Tmax DFrms DBytes CRC HCS Slot/Ports
u 223182 6693 Activ BE 0 0 0 0 0 0 10/11
d 223183 *6870 Activ 0 0 0 0 15/14
L2VPN per CM: (Disabled)
Current CPE=0, IPv4 Addr=0, IPv6 Addr=0 Max CPE=32, IPv4 Addr=0, IPv6 Addr=0
tbu-C4c-1# show cable modem xxxx.xxxx.xxxx
Jun 26 05:25:03
Interface DOC
(DS-US) Mac Bonded State SIS Qos CPE MAC address IP Address
------------- ----- ------ ----------- --- ------------- --- --------------- ---------------------------------------
15/14-10/11 4 DhcpV4Done 1.0 0 xxxx.xxxx.xxxx 10.12.177.223
Total Oper Disable Init Offline
---------------------------------------------------------
Found 1 0 0 1 0