Upstream bonding/use issues | docsis.org

You are here

Upstream bonding/use issues

2 posts / 0 new
Last post
windwaterwaves
Upstream bonding/use issues

Running a Cisco UBR10k MC20x20V cards.

One mac domain works perfect and modems bond to all upstreams and you can see SNR CER and UCER on the interface. A second mac domain doesn't show SNR CER or UCER and does not report any modems on it, but when I look specifically at the interface it does. Is it a docsis 2 thing?

Cable8/0/0/U0 admindown 151 * * * interface is down * * * 0 0
Cable8/0/0/U1 30.000 MHz 151 * * * set to fixed frequency * * * 34583715 526798
Cable8/0/0/U2 23.500 MHz 151 * * * set to fixed frequency * * * 41522621 19570440
Cable8/0/0/U3 18.000 MHz 151 * * * set to fixed frequency * * * 0 0
Cable8/0/0/U4 14.000 MHz 151 * * * set to fixed frequency * * * 0 0

Goose10k#show cable modem cable 8/0/0 upstream 3
D
MAC Address IP Address I/F MAC Prim RxPwr Timing Num I
State Sid (dBmv) Offset CPE P
7cbf.b1b9.0460 10.0.15.68 C8/0/0/p w-online(pt) 3 3.50 2107 1 N
386b.bbdd.ce23 10.0.14.246 C8/0/0/p w-online(pt) 6 3.00 2379 1 N
386b.bbdd.67ed 10.0.14.244 C8/0/0/p w-online(pt) 8 3.50 2338 1 N
b077.ac8f.c3b5 10.0.15.198 C8/0/0/p p-online(pt) 13 2.50 2451 1 N
3c36.e4aa.f50e 10.0.15.129 C8/0/0/p w-online(pt) 15 2.50 2436 1 N
e86d.5271.27d3 10.0.14.145 C8/0/0/p w-online(pt) 19 !2.00 2166 1 N

C8/0/0/UB 78 78 78 0 0 78 0 0 0 0
C8/0/0/U1 20 20 20 0 0 0 0 0 0 0
C8/0/0/U2 35 35 35 0 0 0 0 0 0 0
C8/0/0/U3 1 0 0 1 1 0 0 0 0 0

mbowe
Not enough info

Not enough info

Perhaps provide a show cable modem verbose of one of these partial-mode modems

Probably also need to see your running config

Log in or register to post comments