Greetings
We just purchased a ubr7246 to replace a C3 and can't seem to figure out how to bridge the cable interfaces (4xMC28U) with GiabitEthernet0/1 (Internet.) I would like to put the provisioning server on GigabitEthernet0/2 with an IP of 10.0.0.1/24. Customers will have a public IP on 50.206.3.x/24.
This configuration seemed so much easier on the C3.
Any help would be greatly appreciated.
Thanks,
Leo
the public ip for the customers would go on the bundle interface i.e. bundle 1 and you would put each blade into the same bundle.
What if I don't want to use the 7246 as a router and just all the traffic out on 0/1?
Leo
ubr7246VXR work router only.