UBR7200-3-AUTH_REJECT_PERMANENT_AUTHORIZATION_FAILURE

Hi everyone,

I'm having a big problem witch combination of cisco ubr7246 and motorola sbv5120e.

When I create basic config file wihout service flows with for example only:

Main {
VendorSpecific
{
VendorIdentifier 0x002040;/* 00:20:40 Motorola Vendor Specific */
GenericTLV TlvCode 125 TlvLength 125 TlvValue 0x6d6f746f726f6c613a5253396239657963655300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000;
GenericTLV TlvCode 130 TlvLength 1 TlvValue 0xf8;
GenericTLV TlvCode 168 TlvLength 1 TlvValue 0x01;
GenericTLV TlvCode 211 TlvLength 1 TlvValue 0x00;
}
NetworkAccess 1;
MaxCPE 2;
ClassOfService {
ClassID 1;
MaxRateDown 20000000;
MaxRateUp 10000000;
PrivacyEnable 1;
}
}

In above example the modem authorize correctly, but if I create another file and put USServiceFlow or DSServiceFlow, DSPacketClass or USPacketClass, when modem reads config file, CMTS reject's modem with folowing errors:

00:02:23: %UBR7200-3-AUTH_REJECT_PERMANENT_AUTHORIZATION_FAILURE: <132>CMTS[DOCSIS]:<66030108> Auth Reject - Permanent Authorization Failure . CM Mac Addr <0013.717d.75e4>
SLOT 3/0: 00:01:44: %UBR7200-3-MANUFACTURE_CA_CM_CERTIFICATE_FORMAT_ERROR: <133>CMTS[DOCSIS]: CM MAC Addr <0013.717d.75e4> on Interface Cable3/0 U1

The clock on ubr is definetely correct, as show clock show's correct settings and timezone.

Anyone having any ideas?

Thanks. J.