uBR7111E - No MAC Address, Unsupported I/O Controller | docsis.org

You are here

uBR7111E - No MAC Address, Unsupported I/O Controller

3 posts / 0 new
Last post
Lee
uBR7111E - No MAC Address, Unsupported I/O Controller

Hello All - I have a uBR7111E in for repair, the start-up boot displays 2 errors. They are:

%PA-2-UNDEFIO: Unsupported I/O Controller (type 65535) in I/O Bay. The I/O Controller network interfaces will be unavailable.
&
%LINK-4-NOMAC: A random default MAC address of 0000.0c49.1a93 has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
<<< >>>

How do I resolve these 2 errors, PLEASE?

kwesibrunee
not sure you can the ubr7111e

not sure you can the ubr7111e is an integrated cmts not much is replaceable.

One thing to check though is IOS version, the 7111 will only run on the 12.3 train up to about 12.3.21 sometime after that they dropped support for the ubr 711x's.

If you need the same form factor you can use a ubr7225vxr with a G1/G2 and MC28U/MC88v blades as a replacement. This CMTS requires the 12.2 train.

Lee
uBR7111E - Errors

Thanks for your reply, yet I must get to a resolve on this unit.

Log in or register to post comments