UBR10k log event

Hi,

l'm receiving this log since I update my IOS to: ubr10k4-k9p6u2-mz.122-33.SCJ2a.bin

SLOT 5/0: %JIB3_US_FAUNA-3-JIB3_US_SEU_INT: JIB3_US_FAUNA_SINGLE_BIT_SEU_INT event; cri_bit_info 0x6DFC0220; ctrl_status 0x0000152A

Only slot 5/0 are affect.

any idea ?

Interface Cable5/0/0
Hardware is MC2020V

Upstream MAC Processor Powered by Jib3 Upstream FPGA Complex
Jib3 Upstream FPGA is Initialized
Jib3US Initializtion Error Code: 0
Jib3US Initializtion Status : No error at Startup Init
Jib3 Upstream FPGA Information
Flora FPGA Rev ID = 0x00000006
Flora FPGA HW Rev ID = 0x00000012
Fauna FPGA Rev ID = 0x00000008
Fauna FPGA HW Rev ID = 0x00000009

Jib3US Hardware Flow State Info - Segment 0
Bonded HwFlows Free = 32255
Bonded HwFlows Used = 513
Bonded HwFlows Wait = 0
NonBonded HwFlows Free = 98137
NonBonded HwFlows Used = 167
NonBonded HwFlows Wait = 0
-------------------------------
Total Jib3US HwFlows = 131072

Jib3US State = Active, Active Seg = 0, Clr Rldram Done = True, CCF Done=True

Jib3 Upstream Show Interrupt Stats
Idx InterruptRegister InterruptBit TotalCount Burst Masked:
40 flora map tssalve load 1 0 NO
67 Fauna Global SEU Interrupt 210 0 NO <<<------------- increment
167 fauna spi4 ing src clks rdy 1 0 NO
168 fauna spi4 ing src in frm 1 0 NO
180 fauna spi4 egr snk in frame err 1 0 NO
181 fauna spi4 egr snk clks rdy 1 0 NO
293 dmpi invalid hw flow entry 2 0 NO