uBR10K 8x4

Hello guys!!

We have 1 UBR10K working in 8x4 bonding, but now there is a second ubr on which we are trying to configure the thing differently

For example, on the first ubr, the configuration looks like this:
so we have 4 downstreams from /0-/3, and 4 downstreams from 0/4:

.....
cable fiber-node 26
downstream Integrated-Cable 5/0/0 rf-channel 0-3
downstream Integrated-Cable 5/0/4 rf-channel 0-3
upstream Cable 5/0 connector 0-3
cable fiber-node 27
downstream Integrated-Cable 5/0/1 rf-channel 0-3
downstream Integrated-Cable 5/0/4 rf-channel 0-3
upstream Cable 5/0 connector 4-7
cable fiber-node 7
downstream Integrated-Cable 5/0/3 rf-channel 0-3
downstream Integrated-Cable 5/0/4 rf-channel 0-3
upstream Cable 5/0 connector 12-15
.........


And on the second we need to do something like this:

.....
cable fiber-node 1
downstream Integrated-Cable 5/0/0 rf-channel 0-3
downstream Integrated-Cable 5/0/1 rf-channel 0-3
upstream Cable 5/0 connector 0-3
cable fiber-node 2
downstream Integrated-Cable 5/0/2 rf-channel 0-3
downstream Integrated-Cable 5/0/3 rf-channel 0-3
upstream Cable 5/0 connector 8-11
.....
and not use 0/4

I try to do everything by analogy, but I come across some difficulties
Who can tell is it possible at all and how can we to do it right way please?