is someone using these models of cable modem??
I bought a pair for testing and they are not connecting...
FIrst was the downstream frequency, i use to have 561.25 than i change it to 561 and they start trying to connect.
They are obtained downstream signal then searches upstream takes a few minutes and then return to do the same.
I changed the upstream frequencies and does exactly the same.
Is there a special setting for make them work?
this is my actual frequencys configuration:
load-interval 30
cable tftp-enforce
cable downstream rate-limit
cable downstream annex B
cable downstream modulation 64qam
cable downstream interleave-depth 32
cable downstream frequency 561000000
cable downstream channel-id 100
cable upstream 0 frequency 36000000
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 minislot-size 8
cable upstream 0 power-level 0
cable upstream 0 modulation-profile 2
cable upstream 0 rate-limit
no cable upstream 0 shutdown
cable upstream 1 frequency 32800000
cable upstream 1 channel-width 3200000 3200000
cable upstream 1 minislot-size 8
cable upstream 1 power-level 0
cable upstream 1 modulation-profile 2
cable upstream 1 rate-limit
no cable upstream 1 shutdown
cable upstream 2 frequency 29600000
cable upstream 2 channel-width 3200000 3200000
cable upstream 2 minislot-size 8
cable upstream 2 power-level 0
cable upstream 2 modulation-profile 2
cable upstream 2 rate-limit
no cable upstream 2 shutdown
cable upstream 3 frequency 26400000
cable upstream 3 channel-width 3200000 3200000
cable upstream 3 minislot-size 8
cable upstream 3 power-level 0
cable upstream 3 modulation-profile 2
cable upstream 3 rate-limit
no cable upstream 3 shutdown
cable upstream 4 frequency 23200000
cable upstream 4 channel-width 3200000 3200000
cable upstream 4 minislot-size 8
cable upstream 4 power-level 0
cable upstream 4 modulation-profile 2
cable upstream 4 rate-limit
no cable upstream 4 shutdown
cable upstream 5 frequency 20000000
cable upstream 5 channel-width 3200000 3200000
cable upstream 5 minislot-size 8
cable upstream 5 power-level 0
cable upstream 5 modulation-profile 2
cable upstream 5 rate-limit
no cable upstream 5 shutdown
no cable ip-multicast-echo
no keepalive
hold-queue 1000 in
hold-queue 1000 out
I think i need some help here.. cant find whats wrong..
Regards,-