We are using Terayon BW32xx & BW35xx type CMTS's. The latest software version what we use, is 4.1.3.1.4. If have anybody newer version of software, please send me.
My BW3200 is still at software version 4.1.2.0.7. I think the last version made by Terayon before dropping the CMTS line is actually 4.1.4.0.9. Can someone share its latest version with me?
You can join me at christian_lefrancois at msn dot com
ok, I've got 41803 but I need a config with ospf and rip. right now I'm just configured with a static route and wanted to use ospf and rip for some customers.
I have the same release software & we are looking for a sample config that shows OSPF over RIP. It should be strait forward but it appears that Terayon did this slightly different than other CMTS manufactures.
What's new on this release, bugs fix?
The only thing I'm missing on BW software is SCN, Terayon once told me it'll never be implemented. I wonder how they've managed to obtain its DOCSIS certification, their software is so basic.
Hi ~M,
Sorry for the late answer. From CableLabs doc :
"The QoS attributes of a Service Flow may be specified in two ways: either by explicitly defining all attributes, or
implicitly by specifying a Service Class Name. A Service Class Name is a string which the CMTS associates
with a QoS Parameter Set."
"When the Service Class Name is used in a Service Flow encoding, it indicates that all the unspecified QoS
Parameters of the Service Flow need to be provided by the CMTS. It is up to the operator to synchronize the
definition of Service Class Names in the CMTS and in the configuration file."
So basically, you configure service flows using SCN in the CMTS using CLI "configure terminal > cable > service" (see p.2-82 of "BW 3000 CLI Reference Manual"). Then use only these names in your modem configuration files to define service flows. I'm pretty sure SCN was mandatory for CMTS back to DOCSIS 1.1, it is for DOCSIS 2.0. I think Terayon put a dummy CLI functionality so they can obtain DOCSIS 2.0 certification. CableLabs never suspected it wasn't operational, or they intentionally ignored it.
For me Terayon isn't fully DOCSIS 2.0 certified. But with a lot of $$$ you can obtain anything.
Ashley
Abdul, I am told ypou know your way around the Terayon. I have a Terayon 3230 3240 and I need to recover the passwords. Would you know how I can do that
Dear Sir
Please could you send me details of your company and where you are based.
I would like to speak to you regarding Terayon.
Thanks
Abdul
I have the 4.1.4.0.9 version, but if anyone got anything newer I'd also like to hear from them.
My BW3200 is still at software version 4.1.2.0.7. I think the last version made by Terayon before dropping the CMTS line is actually 4.1.4.0.9. Can someone share its latest version with me?
You can join me at christian_lefrancois at msn dot com
Thanks,
Christian
For an old lab unit. Thanks
Latest build for Terayon CMTS is 4.1.8
ok, I've got 41803 but I need a config with ospf and rip. right now I'm just configured with a static route and wanted to use ospf and rip for some customers.
~Carl
I have the same release software & we are looking for a sample config that shows OSPF over RIP. It should be strait forward but it appears that Terayon did this slightly different than other CMTS manufactures.
James Epley
JEpley@bascom.us
can you get me please
Hey can you share the 41803 thank you
Allan
What's new on this release, bugs fix?
The only thing I'm missing on BW software is SCN, Terayon once told me it'll never be implemented. I wonder how they've managed to obtain its DOCSIS certification, their software is so basic.
Christian
HI Christian,
Can you please elaborate on SCN feature?
~M
Hi ~M,
Sorry for the late answer. From CableLabs doc :
"The QoS attributes of a Service Flow may be specified in two ways: either by explicitly defining all attributes, or
implicitly by specifying a Service Class Name. A Service Class Name is a string which the CMTS associates
with a QoS Parameter Set."
"When the Service Class Name is used in a Service Flow encoding, it indicates that all the unspecified QoS
Parameters of the Service Flow need to be provided by the CMTS. It is up to the operator to synchronize the
definition of Service Class Names in the CMTS and in the configuration file."
So basically, you configure service flows using SCN in the CMTS using CLI "configure terminal > cable > service" (see p.2-82 of "BW 3000 CLI Reference Manual"). Then use only these names in your modem configuration files to define service flows. I'm pretty sure SCN was mandatory for CMTS back to DOCSIS 1.1, it is for DOCSIS 2.0. I think Terayon put a dummy CLI functionality so they can obtain DOCSIS 2.0 certification. CableLabs never suspected it wasn't operational, or they intentionally ignored it.
For me Terayon isn't fully DOCSIS 2.0 certified. But with a lot of $$$ you can obtain anything.
Christian
Ashley
Hello , I got your email of the Docsis site. I have a Terayon 3230 3240 and I need to recover the passwords. Would you know how I can do that
Thanks
Linford
Hi Latha
I wondered if you could share the software also is there an email/number I can contact you on, regarding some other issues?
Thanks
Abdul
Hi!
Can you share with me the 4.1.8 Terayon image?
Thx,
Gyu
Hi!
Can you give me the Terayon image?
Thx,
Gyu
Ashley
Abdul, I am told ypou know your way around the Terayon. I have a Terayon 3230 3240 and I need to recover the passwords. Would you know how I can do that
Thanks
Linford
Does anyone has a newer terayon cmts software
thank you in advance
allan_n5
(at)
hotmail
com
Allan