Hello Everyone,
May i ask you how you can check the RFGW10 license. There is no show license command available to the rfgw10.
It's "show cable licences " or "show cable licenses all"
RFGW.enfl#sh cable licenses 3
Slot 3 : License Capability : DS384_128_CLEAR --------------------------------------------------- Feature: Downstream Licenses Installed: 128 Consumed: 64 Available: 64 Forced-Shut: 0
Feature: Downstream Span Licenses Installed: 0 Consumed: 0 Available: 0 Forced-Shut: 0
Feature: PowerKEY License Installed: NO Enforced: NO
Feature: DVB License Installed: NO Enforced: NO
I think the older RFGW10 with 48QAM linecards doesn't need any licenses. They were introduced with the next generation 384QAM linecards.
Hi,
Here is the command you needed to see the licenses. Tell, if you needed more. show cable licenses all "slot-id"
It's "show cable licences " or "show cable licenses all"
RFGW.enfl#sh cable licenses 3
Slot 3 : License Capability : DS384_128_CLEAR
---------------------------------------------------
Feature: Downstream Licenses
Installed: 128 Consumed: 64 Available: 64 Forced-Shut: 0
Feature: Downstream Span Licenses
Installed: 0 Consumed: 0 Available: 0 Forced-Shut: 0
Feature: PowerKEY License
Installed: NO Enforced: NO
Feature: DVB License
Installed: NO Enforced: NO
I think the older RFGW10 with 48QAM linecards doesn't need any licenses. They were introduced with the next generation 384QAM linecards.
Hi,
Here is the command you needed to see the licenses. Tell, if you needed more.
show cable licenses all "slot-id"