Hi,
I am trying to understand how the MIB 'docsifcmstatusresets' work. When I looked at this MIB property it has a description as 'Number of times the CM reset or initialized this interface'.
This is how I tested to see if the MIB 'docsifcmstatusresets' increments its counter with each reboot:-
1. I rebooted my cable modem through the MIB object 'docsdevresetnow'.
2. Then I checked the value of 'docsifcmstatusresets'. The value was zero.
3. I repeated step 1 few times and I found that the value of the 'docsifcmstatusresets' remained zero.
Can anyone please expalin me what this MIB object 'docsifcmstatusresets' actually mean?
Under what circumstances does it increments its value?
I would appreciate your response!
Thanks,
newbie
Hello,
It's my understanding that these are modem generated resets due to lost sync events. Manually sending a reset does not seem to increment the counter. Verify by removing RF for a couple of minutes, then reconnect.
Thanks for your help!
Yes that worked. When I disconnected the HFC, based on the number of times the modem tried to reinitialize the MAC, the 'docsifcmstatusresets' counter incremented accordingly.
Thanks again,
newbie
Thanks for your help! Yes that worked. When I disconnected the HFC, based on the number of times the modem tried to reinitialize the MAC, the 'docsifcmstatusresets' counter incremented accordingly.
Thanks again,
newbie