Good afternoon
Could you help me please,
Using OID, I need to block GUI and Telnet access to Cable modems. Only allow this access to a specific network segment.
for example:
Allow GUI to 10.10.10.0 255.255.255.0
Allow Telnet to 10.10.10.0 255.255.255.0
Block GUI to all
Block Telnet to All.
The cable modem is Thomson DWG855 and Technicolor TC7300, especially CM with Chipset "BROADCOM"
thank you in advance for your help
Regards,
Have a look at RFC2669 or as a sample http://support.usr.com/support/6000/6000-ug/five.html
What about an ACL on your CMTS?