the TCC+ should work. You need the DTCC-Card only for an M-CMTS Environment where the DTCC is use as an DTI-Client. For I-CMTS you can also the DTCC Card in Freerun mode.
Hello buzzwork,
thanks for info. Last week we has the 20x20 linecard in our lab, but we use also already the DTCC in our Chassis. I think the TCC+ is also end of sale...regarding this link: https://www.cisco.com/en/US/prod/collateral/video/ps8806/ps5684/ps2209/end_of_life_notice_c51-530554.html
From what i can read is isnt like that: https://www.cisco.com/en/US/docs/interfaces_modules/cable/broadband_proc...
Prerequisites for Configuring the Cisco UBR-MC20X20V Cable Interface Line Card
The Cisco uBR10012 universal broadband router must have two DOCSIS Timing, Communication and Control (DTCC) cards configured before installing the Cisco UBR-MC20X20V cable interface line card.
Hi Martin,
the TCC+ should work. You need the DTCC-Card only for an M-CMTS Environment where the DTCC is use as an DTI-Client. For I-CMTS you can also the DTCC Card in Freerun mode.
regards,
wittmann
P.S. Sorry for my poor english ;)
just got info from Cisco that dual-DTCC card is needed for MC20x20
Now you know
Martin
DK
regards,
wittmann
P.S. Sorry for my poor english ;)
tks,
cems
Hey
From what i can read is isnt like that:
https://www.cisco.com/en/US/docs/interfaces_modules/cable/broadband_proc...
Prerequisites for Configuring the Cisco UBR-MC20X20V Cable Interface Line Card
The Cisco uBR10012 universal broadband router must have two DOCSIS Timing, Communication and Control (DTCC) cards configured before installing the Cisco UBR-MC20X20V cable interface line card.
Martin
DK