I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).
I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing
just missing the configuration of the cable modem. Please help me. thanks
I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).
I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing
just missing the configuration of the cable modem. Please help me. thanks
arris_c3 wrote:I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).
I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing
just missing the configuration of the cable modem. Please help me. thanks
Hello,
first, i don't believe the FE0/1 and the cable1/0 IP-Address should are the same, but equal.
Is it possible to configure a cable helper-address (IP-Address from the Provisioning (DHCP, TOD, TFTP, SYSLOG). The CMTS must known where he put the DHCP Discover from the CM.
I hope i can help, we have only cisco uBR's.
wittmann wrote:arris_c3 wrote:I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).
I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing
just missing the configuration of the cable modem. Please help me. thanks
Hello,
first, i don't believe the FE0/1 and the cable1/0 IP-Address should are the same, but equal.
Is it possible to configure a cable helper-address (IP-Address from the Provisioning (DHCP, TOD, TFTP, SYSLOG). The CMTS must known where he put the DHCP Discover from the CM.
I hope i can help, we have only cisco uBR's.
Thanks, I already setup a external DHCP, and TFTP server;
[The CMTS must known where he put the DHCP Discover from the CM.]
This is the part I don't quit know how to configure.
I hope the russian guy can help me out with this. I saw he has a lot of good comment on Arris CMTS.
all config required. :)