FritzBox modem | docsis.org

You are here

FritzBox modem

7 posts / 0 new
Last post
gegor
FritzBox modem

Hello.

I have fritzbox cable 6320v2 in my lab.
Web interface is in german. Reseller privided me with firmware with english interface, but i cant update
modem firmware.
I have the following files
6320_v2.en-de-es-it-fr.110.06.21.073008002010.cvc
AVM-6320-CVCv2int.der
FRITZ.Box_6320_v2_Cable.en-de-es-it-fr.110.06.21.image

my docsis configuration file has

Main
{
GlobalPrivacyEnable 0;
SnmpMibObject 1.3.6.1.2.1.69.1.2.1.2.1 IPAddress 0.0.0.0 ; /* IP Address */
SnmpMibObject 1.3.6.1.2.1.69.1.2.1.3.1 IPAddress 0.0.0.0 ; /* Subnet Mask */
SnmpMibObject 1.3.6.1.2.1.69.1.2.1.4.1 String "sunubr2mrtg" ; /* Community */
SnmpMibObject 1.3.6.1.2.1.69.1.2.1.5.1 Integer 3; /* readWrite access */
SnmpMibObject 1.3.6.1.2.1.69.1.2.1.6.1 HexString 0xc0 ; /* interface wan */
SnmpMibObject 1.3.6.1.2.1.69.1.2.1.7.1 Integer 4; /* createAndGo */
SwUpgradeFilename "6320_v2.en-de-es-it-fr.110.06.21.073008002010.cvc";
SwUpgradeServer 192.168.1.2;
SnmpMibObject docsDevSwAdminStatus.0 Integer 2;
NetworkAccess 1;
MaxCPE 15;
UsPacketClass
{
ClassifierRef 1;
ServiceFlowRef 2;
ActivationState 1;
IpPacketClassifier
{
DstPortStart 5060;
DstPortEnd 5060;
}
}
UsPacketClass
{
ClassifierRef 2;
ServiceFlowRef 2;
ActivationState 1;
LLCPacketClassifier
{
EtherType 0x030f16;
}
}
DsPacketClass
{
ClassifierRef 3;
ServiceFlowRef 4;
ActivationState 1;
IpPacketClassifier
{
DstPortStart 5060;
DstPortEnd 5060;
}
}
UsServiceFlow
{
UsServiceFlowRef 1;
QosParamSetType 7;
SchedulingType 2;
MinReservedRate 0;
MaxRateSustained 2000000;
}
UsServiceFlow
{
UsServiceFlowRef 2;
QosParamSetType 7;
SchedulingType 2;
TrafficPriority 3;
}
DsServiceFlow
{
DsServiceFlowRef 3;
QosParamSetType 7;
MinReservedRate 0;
MaxRateSustained 25000000;
}
DsServiceFlow
{
DsServiceFlowRef 4;
TrafficPriority 4;
QosParamSetType 7;
}
}

But modem doesn't ask for firmware.
I tryed both FRITZ.Box_6320_v2_Cable.en-de-es-it-fr.110.06.21.image
and FRITZ.Box_6320_v2_Cable.en-de-es-it-fr.110.06.21.image files
but no luck. Modem doesn't ask for file

derytelecom
look at http://www.docsis.org

look at http://www.docsis.org/node/2143 for an example of a working upgrade file

the cvc must be in the file with MfgCVCData lines
the upgradefilename is the .image

Sarcarean
No problem

You might notice that you accidentally set the Firmware filename to that of your CVC file. Second, you need to include (embed) that file into your config file. Also, I recommend you set the SNMP statements as well (docsDevSwServer and docsDevSwFilename). Even though DOCSIS has those two as TLVs, some modems ignore that in favor of the SNMP ones.

I imported your config and made those changes, which makes it look like this: http://postimg.org/image/w7s27s16f/

Just send me an email (contact@embeddedcomputers.net), and I'll email you the config with your CVC embedded.

mdulaj
6320_v2_Cable

Can you please send me the english firmware for fritzbox 6320_v2_Cable , I have it only german firmware, also I have the procedure how to upgrade it by only through direct PC.

my email: mdulaj @ gmail .com

greenblind
if its possible..

and if u can, send me english firmware too :)

to kosiarzxx @ gmail.com

i will be grateful!

Cheers.

BetterH2O
Required files

Hello gregor, would you please send me the following files. Or someone who has it also.
6320_v2.en-de-es-it-fr.110.06.21.073008002010.cvc
AVM-6320-CVCv2int.der
FRITZ.Box_6320_v2_Cable.en-de-es-it-fr.110.06.21.image

tykee
Gregor, can you send me the

Gregor, can you send me the new FW file for FritzBox 6320? I have only 110.06.03.
My eMail: deni [at] krs.si

Thanx.

Log in or register to post comments