Hello,
I'm looking for mibs to off "ip flood detection" in the firewall section on EVW3200/EVW320b.
when its turn on, it makes alot of "time outs" and dropping connections.
its similiar to other ubee modems, wifi have same mibs like rest of ubee .
(ex. ddw3611/evw3200 .1.3.6.1.4.1.4684)
every help will be appreciated.
Cheers!
Lukasz
in Your CM's.
W każdym razie #grep -i flood * w katalogu z mib-ami wiele Ci wyjaśni.
cgUiFirewallIpFloodDetectionEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { cgUserInterfaceFirewallWebFilter 8 }
That's all doc!!
thanks for reply but it doesnt work. .2863. is only for thomson :(
Then check Your MIB's as I pointed before. Grep.
i have checked typically Ubee mibs,
UBEE-TRA-RG-MGMT-MIB
ubee rg firewall base
ubee hgw firewall ip flood detection enable
1.3.6.1.4.1.4684.2.20.10.1.5.0
but when i do snmpwalk on modem for it, its no such object like this.
so i tried do snmpwalk for 1.3.6.1.4.1.4684.2.20.10, and i get only 2 options for NAT or bridge mode and reset device.
i have tried mibs from cisco/thomson etc.
SET IT! Doesn't work?
doesn't work. i have tried